Stand and Pivot Transfer a Weight Bearing Resident from Bed to Wheelchair Using a Gait Belt Flashcards
step by step
step 1 hands
Perform hand hygiene.
a. Cover all surfaces of hands with hand sanitizer.
b. Rub hands together until hands are completely dry
step 2 explain
Explain the procedure to the resident.
step 3 obtain
Obtain a gait belt
step 4 bold lock
Lock the bed brakes to ensure the resident’s safety
step assist
Assist the resident in putting on non-skid footwear
step 6 position
Position the bed so the resident’s feet will be flat on the floor when the resident is sitting on the bed
step 7 sit
Assist the resident to a sitting position
step 8 w/c
Position the wheelchair arm/wheel touching the side of the bed.
step 9 bold w/c
Lock the wheelchair brakes to ensure the resident’s safety
step 10 gate
Place a gait belt around the resident’s waist to stabilize the trunk
step 11 tight
Tighten the gait belt
step 12 check
Check the gait belt for tightness by slipping fingers between the gait belt and the resident
step 13 face
Face the resident.
step 14 grasp
Grasp the gait belt with both hands.
step 15 stand
Bring the resident to a standing position