SOP's 300 Series Flashcards
303.03 What are the 4 parts to the Scott Air Pak NxG2?

- Cylinder and valve assembly
- Back frame and harness
- Ez flo or EZ flo II regulator
- AV 3000 face piece
303.05 What are the three ways to don an SCBA?
- Seated method
- Overhead method
- Coat method
303.06 What 3 alarms are on the pass device?
Pre alarm
Full alarm
Manual alarm
How many batteries and what type does the SCBA take?
3 c batteries
How many pumps of Scott Wash is recommended for cleaning the SCBA regulator and how long should it be left?
6 pumps and 10 min
303.10 How many pumps of Scott wash are recommended for the face mask?
3 pumps
What oil besides bar oil can we use for lubing the chain on a chainsaw?
30wt
What is the oil to gas ratio for a MFD chainsaws?
50 to 1
What criteria is used before replacing a chainsaw blade?
- Missing/damaged tips on 3 or more in a row.
- Missing/damaged tips on 6 or more
- Cracked/broken tie straps.
- Dull chain.
What 3 types of circular saws are used by MFD?
Partner, K-12, Husqvarna
What type of blades does MFD use on the circular saw?,
Extra high speed blades only
304.03 How many cfms can an electrically powered Smoke ejector push
5200cfm
304.03 How many watts and amps does it take to start an electric Smoke Ejector?,
1500 - 2000 watts and 30-35 amps
304.03 What size gas smoke ejectors does MFD use?
18, 20, and 26
304.03 What type of oil is suggested for smoke ejector motor?
10w40
304.04 What are the specs on the Holmatro spreader?
23000lbs of spreading force
weighs 41lbs
squeezing force of 9700lbs
27 inch spread
304.04 What are the specs of the Holmatro cutter?
5 in cutter
63400lbs cutting force
Weighs 27.5 lbs
304.04 What are the specs of the RAM?
pushing power of 22400lbs
extends to 43 3/8 inches
weighs 36.5lbs
What is the max thickness for the cutters to cut?
4mm or 5/32 of an inch
304.05 What should each Ajax tool kit include?
air chisel, pry bar, four chisels, quarter-inch air hose, oil and regulator.
What is the safety regulator for the Ajax tool set at?
325 PSI
304.05 What is the normal operating PSI for the AJAX tool?
90-160 PSI with a max of 300 PSI
304.06 Where are Heat Scanners located?
in each BC vehicle
304.06 How do Heat sensors work?
senses infrared energy
304.08 What type of aluminum is used in MFD ladders?
Heat treated alloy
304.09 “Fly out” use of MFD ladders is in compliance with what NFPA standard?
1932
How many FF are allowed on a 19ft ladder?
of FF = the first number on the ladder length
19ft=1
20ft=2
30ft=3
304.11 How wide is an attic ladder?
12 3/4 inches.
304.11 What size and how many rungs are on an attic ladder?
9ft and 10ft ladders with 14 rungs
304.12 What are lengths of the straight ladders used by MFD
14, 16, and 20ft
304.13 What type of rope does the MFD prefer for its life lines?
3 stranded Nylon
304.13 How many much can a life line hold?
600lbs or 2 FF
304.15 What are the five basic knots used in Fire fighting?,
Clove hitch
Bowline
Becket bend
Figure 8
Rescue harness
304.16 What is max lift capacity of the airbags used by MFD?
146,000lbs
304.16 What PSI is need to inflate the airbags?
118psi
304.16 How much lift can 2 airbags give stacked on top of each other?
40 inches
305.06 What is the pump intake relief valve set at?
150 PSI
305.06 Pump residual pressure can be no less than…?
20psi
305,07 What is the GPM per sprinkler head?
90 gpm
306.03 What is the standard bumper load and the recommended bumper load length?
Standard=100ft
Recommended=150ft
Who makes the decision for the length of the bumper load?
Captains decision
Max MPH for a forward lay?
10mph
309.14 How far from the door should a fan be placed? What angle should the fan be placed?
6ft from the door and 20-30 degree angle
What is the equation for PDP?
PDP= np+fl+AP+ EL
What is the equation for Friction Loss?
FL= 2(Qsq)xFFxL/100