saftey Flashcards

1
Q

What is the correct name for the acronym OSHA?
A. Office of Safety and Health Administration
B. Occupational Safety and Health Association
C. Organizational Safety and Health Affiliation
D. Occupational Safety and Health Administration

A

D. Occupational Safety and Health Administration

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is the purpose of the OSHA law?
A. Protect companies from safety violations
B. Prohibit safety violations against individuals
C. Provide a place of employment free from safety hazards
D. Prohibit safety violations against individuals with disabilities

A

C. Provide a place of employment free from safety hazards

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

The Safety Standards utilize the abbreviation 29 CFR Part 1926. What does the acronym
CFR stand for?
A. Code of Federal Register
B. Code of Federal Regulations
C. Construction Federal Register
D. Construction Federal Regulations

A

B. Code of Federal Regulations

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Which document is utilized to keep the CFR up to date?
A. Federal Register
B. Federal Regulations
C. Federal Compliance Standards
D. Federal Safety and Health Violations

A

A. Federal Register

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Which Part of the OSHA Standards is designated for Recordkeeping?
A. 5(a)(1)
B. 1904
C. 1910
D. 1926

A

B. 1904

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Which Part of the OSHA Standards is designated for Inspections?
A. 5(a)(1)
B. 1903
C. 1910
D. 1926

A

B. 1903

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Which Part of the OSHA Standards is designated for General Industry?
A. 1903
B. 1904
C. 1910
D. 1926

A

C. 1910

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What does the safety acronym CPL stand for?
A. Compliance
B. Code Personnel
C. Competent Personnel
D. Construction Personnel

A

A. Compliance

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What does the safety acronym STD stand for?
A. Standard
B. Short Term Directive
C. Safety Training Directive
D. Safety Training and Development

A

A. Standard

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What is the purpose of an STD?
A. To provide a formal interpretation of an OSHA Regulation
B. To provide advice about an OSHA Regulation
C. To protect companies from safety violations
D. To prohibit companies from safety violations

A

A. To provide a formal interpretation of an OSHA Regulation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What does the safety acronym MSDS stand for?
A. Master Safety Data Sheet
B. Material Safety Data Sheet
C. Material Standard Data Sheet
D. Management Safety Designated Standard

A

B. Material Safety Data Sheet

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

12 Which of the following activities is considered a Work Related Recordable?
A. A worker employed by you is on the premises to visit and gets injured
B. You get ill from the fumes while working in a certain area of the project
C. You are playing racquetball at the employer owned courts on your break with
another employee and you are injured
D. You are coming to work and you get injured in the parking lot as you exit the car

A

B. You get ill from the fumes while working in a certain area of the project

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Which of the following is considered a Work-Related Recordable?
A. Employee loses consciousness
B. Treatment of first degree burn(s)
C. Application of bandage(s) during any visit to medical personnel
D. Application of antiseptics during first visit to medical personnel

A

A. Employee loses consciousness

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Which of the following is considered a Work-Related Recordable?
A. Removal of foreign bodies embedded in the eye
B. Removal of foreign bodies not embedded in the eye
C. Removal of foreign bodies from uncomplicated wound
D. Application of hot or cold compress(es) during first visit to medical personnel

A

A. Removal of foreign bodies embedded in the eye

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Which of the following is described in STD 3-1.1 of an accident prevention program?
A. A log of all previous safety violations for the company
B. Written job safety analysis that must be available for OSHA inspector
C. Guidelines for the minimum elements of an accident prevention program
D. Evaluation of their accident program by a Certified Safety Professional (CSP)

A

C. Guidelines for the minimum elements of an accident prevention program

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Which of the following is true of the OSHA training regulations?
A. Employer must train all employees annually
B. Employer must maintain a record of training with date, time, and subject
C. Employer must train all employees regularly in safety recognition and avoidance
D. Employer must have an OSHA Approved Certified Trainer to teach employees

A

C. Employer must train all employees regularly in safety recognition and avoidance

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

According to OSHA, which document must be filled out immediately after an accident by
the supervisor describing the accident in detail?
A. Insurance forms
B. OSHA’s Summary of Work-Related Injuries and Illnesses (OSHA’s 300A)
C. OSHA’s Log of Work-Related Injuries and Illnesses (OSHA’s Form 300)
D. OSHA’s Injury and Illness Incident Report (OSHA’s Form 301)

A

D. OSHA’s Injury and Illness Incident Report (OSHA’s Form 301)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

According to OSHA, which information must be posted at the job site and easily
accessible to all employees at all times?
A. Company Safety Policy, OSHA Common Violations, Injury Log
B. Variance Approval, Rights and Responsibilities Form, Citations
C. Worker Compensation rules, Compliance Sheet, Supplemental Record of Injury
D. Job Safety/ Health Regulations, Material Safety Data Sheet Notice, Emergency #

A

D. Job Safety/ Health Regulations, Material Safety Data Sheet Notice, Emergency #

19
Q

When and Where must the OSHA Summary (OSHA 300A) be posted?
A. All year long and easily accessible to all employees at the job site
B. All year long and in the Project Manager’s office in the main office
C. February 1 - April 1 and accessible to all employees at the jobsite
D. February 1 - April 1 and in the office employees’ break room in the main office

A

C. February 1 - April 1 and accessible to all employees at the jobsite

20
Q

The OSHA Act states that “each employer shall furnish to each employee a place of
employment which is free from recognized hazards that are causing or likely to cause
death or serious physical harm to an employee.” Which section is this stated in?
A. 5(a)(1)
B. 1910.10 (a)
C. 1926.10(a)
D. 1903.10 (a)

A

A. 5(a)(1)

21
Q

According to OSHA violations, what is the name of the violation where the firm or
designated person is aware that a hazardous condition exists, knows that the condition
violates a standard and makes no effort to eliminate the safety hazard?
A. Willful Violation
B. Serious Violation
C. De Minimis Violation
D. Other-Than-Serious Violation

A

A. Willful Violation

22
Q

Which of the following would be an example of Due Diligence?
A. Reports violations to OSHA
B. Tells employees to be careful
C. Corrects the hazard(s) immediately
D. Screams and threatens the workers to comply

A

C. Corrects the hazard(s) immediately

23
Q

The compliance officer notices a potential hazard that is likely to cause serious physical
harm but a regulation does not exist under which provision can the contractor be cited?
A. Federal Register
B. General Duty Clause
C. Construction Safety Act
D. Code of Federal Register

A

B. General Duty Clause

24
Q

What type of inspection is given top priority by OSHA?
A. Imminent Danger
B. Employee Complaints
C. Catastrophe or Fatal Accident
D. Programmed Inspections

A

A. Imminent Danger

25
Q

In construction, what is the minimum number of employees that an employer must have
before they are required to maintain records of occupational injuries and illnesses?
A. 2
B. 11
C. 20
D. 100

A

B. 11

26
Q

What is the minimum number of days for posting the De Minimis Violation?
A. 1
B. 3
C. 15
D. 60

A

B. 3

27
Q

Which of the following is the definition of a work-related catastrophe?
A. The death of two or more workers
B. An injury or illness that requires first aid treatment
C. An injury or illness that requires medical treatment
D. An injury or illness that requires hospitalization of 3 or more workers

A

D. An injury or illness that requires hospitalization of 3 or more workers

28
Q

What is the maximum number of hours for reporting a Death or Catastrophe to OSHA?
A. 4
B. 8
C. 24
D. 48

A

B. 8

29
Q

What is the maximum number of days that an employer has to contest any citations?
A. 1
B. 15
C. 30
D. 60

A

B. 15

30
Q

The Pipefitting Subcontractor is required to lay pipe in a trench that is 10 feet deep and 3
feet wide with vertical walls and no sloping or other protection. The trench was dug by
the Excavator. The General Contractor supervised the work, but had no employees in the
trench. The Concrete Sub told the General Contractor and Excavator that the trench
needed to be sloped or shored before their employees could work in the trench. During
the OSHA inspection, OSHA observed the General at the trench supervising the pipefitter
in the trench. Which Contractor(s) would receive a citation for an unsafe trench?
A. Pipefitting Sub only
B. Pipefitting Sub and Excavator
C. Pipefitting Sub, Excavator, and General Contractor
D. Pipefitting Sub, Excavator, General Contractor, and Concrete Sub

A

C. Pipefitting Sub, Excavator, and General Contractor

31
Q

You are Spot Welding. Which of the following types of Eye and Face Protection can be
worn?
A. Welding Helmets
B. Goggles, Flexible Fitting, Regular Ventilation
C. Goggles, Flexible Fitting, Hooded Ventilation
D. Welding Goggles, Eyecup Type, Tinted Lenses

A

B. Goggles, Flexible Fitting, Regular Ventilation

32
Q

You are Chipping. Which of the following types of Eye and Face Protection can be worn?
A. Welding Helmets
B. Goggles, Cushion Fitting, Rigid Body
C. Goggles, Flexible Fitting, Hooded Ventilation
D. Welding Goggles, Eyecup Type, Tinted Lenses

A

B. Goggles, Cushion Fitting, Rigid Body

33
Q

You are Handling Chemicals considered severe exposure. Which of the following types
of Eye and Face Protection can be worn?
A. Spectacles, Plastic Frame with Sideshields
B. Goggles, Cushion Fitting, Rigid Body
C. Goggles, Flexible Fitting, Hooded Ventilation
D. Goggles, Flexible Fitting, Hooded Ventilation with Face Shield

A

D. Goggles, Flexible Fitting, Hooded Ventilation with Face Shield

34
Q

You are performing light Grinding. Which of the following types of Eye and Face
Protection can be worn?
A. Spectacles with Sideshields
B. Goggles, Flexible Fitting, Hooded Ventilation
C. Welding Goggles, Coverspec Type, Clear Safety Lenses
D. Chipping Goggles, Coverspec Type, Clear Safety Lenses

A

A. Spectacles with Sideshields

35
Q

You need a Respirator for an Oxygen Deficient environment, Which of the following
types of Respirators must be worn?
A. Air-purifying Respirator
B. Supplied-air Respirator (SAR)
C. Powered air-purifying Respirator (PAPR)
D. Self-contained breathing apparatus (SCBA)

A

D. Self-contained breathing apparatus (SCBA)

36
Q

You need a Respirator for a combination gas ,vapor, and particulate contaminants not
immediately dangerous to life, Which of the following types of Respirators must be
worn?
A. Air-purifying Respirator
B. Supplied-air Respirator (SAR)
C. Powered air-purifying Respirator (PAPR)
D. Self-contained breathing apparatus (SCBA)

A

A. Air-purifying Respirator

37
Q

Which type of fire extinguisher Letter, Old Symbol, Color and New Symbol would be
used for extinguishing a fire caused by a combustible metal such as aluminum?
A. The old extinguishers can be identified by a Green Triangle around the letter A.
The New Extinguisher pictograph is of a trash can and wood fire
B. This extinguisher can be identified by a Red Square around the letter B. The New
Extinguisher can be identified by a gas can pictograph
C. This extinguisher can be identified by a Blue Circle around the letter C. The New
extinguisher pictograph is an electrical plug and receptacle pictograph
D. This extinguisher can be identified by a Yellow Five-pointed Star around letter D

A

D. This extinguisher can be identified by a Yellow Five-pointed Star around letter D

38
Q

Which type of fire extinguisher Letter, Old Symbol, Color and the New Symbol would be
used for extinguishing a fire caused by a flammable liquid?
A. The old extinguishers can be identified by a Green Triangle around the letter A
The New Extinguisher pictograph is of a trash can and wood fire
B. This extinguisher can be identified by a Red Square around the letter B. The New
Extinguisher can be identified by a gas can pictograph
C. This extinguisher can be identified by a Blue Circle around the letter C. The New
extinguisher pictograph is an electrical plug and receptacle pictograph
D. This extinguisher can be identified by a Yellow Five-pointed Star around letter D

A

B. This extinguisher can be identified by a Red Square around the letter B. The New
Extinguisher can be identified by a gas can pictograph

39
Q

Which type of fire extinguisher Letter, Old Symbol, Color and the New Symbol would be
used for extinguishing a fire caused by electrical wiring?
A. The old extinguishers can be identified by a Green Triangle around the letter A
The New Extinguisher pictograph is of a trash can and wood fire
B. This extinguisher can be identified by a Red Square around the letter B. The New
Extinguisher can be identified by a gas can pictograph
C. This extinguisher can be identified by a Blue Circle around the letter C. The New
extinguisher pictograph is an electrical plug and receptacle pictograph
D. This extinguisher can be identified by a Yellow Five-pointed Star around letter D

A

C. This extinguisher can be identified by a Blue Circle around the letter C. The New
extinguisher pictograph is an electrical plug and receptacle pictograph

40
Q

On the new fire extinguishers, what are the Color and Pictograph Symbol used displayed
on the fire extinguisher to indicate that a specific class of fire is prohibited?
A. The background is Green and a Slash is shown in Black
B. The background is Bright Red and a Slash is shown in Black
C. The background is Black and a Slash is shown in Bright Red
D. The background is White and a Slash is shown in Bright Red

A

D. The background is White and a Slash is shown in Bright Red

41
Q

What is the maximum horizontal travel distance to retrieve a fire extinguisher in a
Building Area?
A. 10 Feet
B. 25 Feet.
C. 75 Feet
D. 100 Feet.

A

D. 100 Feet.

42
Q
  1. What is the maximum horizontal travel distance to retrieve a fire extinguisher in a Fuel
    Service Area?
    A. 10 Feet
    B. 25 Feet.
    C. 75 Feet
    D. 100 Feet.
A

C. 75 Feet

43
Q

What is the location of a Fire Extinguisher on a Multistory building?
A. On an Inside Wall
B. On an outside Wall
C. In the tool gang box
D. Adjacent to Stairway

A

D. Adjacent to Stairway