Recurrent Written Test Guide Flashcards

1
Q

How is BURN fuel on the flight plan calculated?

A

​ The amount of fuel burn in pounds and time based​ on forecast winds, the flight plan ​route, and includes one instrument approach and​ landing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Do all cabin​ seats need to be assigned if a flight deck or flight attendant jumpseat is ​to be utilized?

A

No. The flight deck and flight attendant jumpseats may be assigned on a discretionary ​basis regardless of whether all cabin seats are occupied or​ not.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Must a Frontier employee have the letters ACM on his/her Frontier ID badge to ​occupy the flight deck jumpseat?​

A

Yes, unless the Frontier employee has a signed Letter of Authorization from Frontier ​Flight Ops management. ​

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

The ACM Jumpseat Briefing Card may be used to satisfy the ACM briefing ​requirement?

A

True

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Employees with knowledge of an accident involving an aircraft​ for which they ​performed a​ safety-sensitive or​ security-related function at or near​ the time of the ​accident may not use alcohol for​ ____ hours after the accident unless​ he or she has ​been given​ a post accident test for drugs and alcohol, or​ if Frontier Airlines has ​demonstrated that​ their performance could not​ have contributed to the accident.​

A

10

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Which of the following qualifies the flight crew to fly into “Special Airports”? ​(Select ALL answers that apply)

A

​☑​ ​ ​Within the preceding 12 calendar months, the captain or first officer has made an entry ​to that airport, including​ takeoff and landing, while serving as a flight crewmember.​ ​​
​☑​ ​ ​Within the preceding 12 calendar months, the captain has qualified by using pictorial ​means for that airport.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

When the first officer has less than 100 hours of flight time​ as SIC in type airplane ​being flown at Frontier, the captain (unless a check airman) must​ make all takeoff ​and landings​ in what conditions? (Select ALL answers that apply)​

A

☑​ ​ ​When the​ crosswind component for the runway to be used is in excess of 15 knots.​ ​​
​☑​ ​ ​When the braking action​ on the runway to be used is less than “good”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Which of the following describes emergency authority? (Select ALL answers that ​apply) ​​​

A

In an emergency situation that​ requires immediate decision and action, the pilot in ​command may take any action deemed necessary under the circumstances.​

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Who has operational control to refuse a passenger?

A

The CRO

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Who has the authority to cancel a flight?

A

Only Systems Operations Control (SOC)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Which of the following requires an alternate airport? (Select ALL answers that ​apply)

A

​☑​ ​ ​​ Any flight released under supplemental operations. ​​
​☑​ ​ ​If severe icing conditions are forecast at the destination within one hour of the ETA, a ​suitable alternate must​ be listed on the release. ​​
​☑​ ​ ​When dispatched Method 2. ​​ ​

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Which of the following is NOT required before a revenue flight may block out?​

A

​The Final Flight Information List ​​ ​

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

If the planned route is changed by ATC​ prior to takeoff, and the resulting stage ​length increases​ by more than ____ NM, the captain must​ obtain an ARTR.​ ​​​

A

100NM ​​ ​

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Which of the following best describes method 1?​ ​
​​

A

​If an engine failure occurs anywhere from V1 to the destination, the aircraft will​ clear ​all​ obstructions 5 SM on either side of the intended route by 1,000 feet until reaching ​the destination. ​​ ​

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

How​ is CONTNGNCY fuel on the flight plan calculated?​ ​(1 point) ​​

A

Fuel in time as well as in pounds based on holding at 15,000 MSL at Green Dot.​ ​

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Which of the following best describes method 2?

A

If an engine failure occurs, the aircraft will be able to divert​ to at least one suitable ​airport (driftdown alternate)​ from flight planned cruise altitude and clear all​ obstacles 5 ​SM on either side​ of the route of flight by 2,000 feet until reaching the diversion airport.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Which of the following would require an ARTR? (Select ALL answers that apply)

A

☑ An alternate is added or changed
☑ An MEL is added

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

What does ALTN fuel on the flight plan consist of?

A

Climb to cruise flight altitude, cruise flight to the most distant alternate, one (1)
approach and landing, planned at a cost index of 0

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

Are Simple Special Procedures mandatory to follow in both IMC and VMC? If so,
to what altitude?

A

They are mandatory in IMC until 3,000’ AFE (if radar vectors are not available) and
VMC until reaching 1000ft AFE unless otherwise specified.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

Which of the following are ways to determine Actual Landing Performance?
(Select ALL answers that apply)

A

☑ The AWP solution.
☑ The QRH landing distance performance section.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

What are some strategies for dealing with weight restricted flights? (Select ALL
answers that apply)

A

☑ Increase the PMTOW or reducing tanker fuel (if any).
☑ Remove COMAT (not AOG).
☑ Obtain child counts.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

Which of the following are approved methods to get Weight and Balance
Information for departure? (Select ALL answers that apply)

A

☑ AWP Solution (Primary Method).
☑ Computer-Generated W&B Manifest from Centralized Load Planning.
☑ Manual W&B Read Back Form located in the diversion kit.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

Which of the following fuel considerations are required prior to departure? (Select
ALL answers that apply)

A

☑ The aircraft must have enough fuel to fly to the airport to which it is dispatched;
thereafter, to fly to and land at the most distant alternate airport (when required) for the
airport to which it is dispatched; and thereafter, to fly for 45minutes at normal cruising
fuel consumption.
☑ When dispatched under Ops Spec B043 (As noted on the dispatch release), the aircraft
must have enough contingency fuel to fly for a period of 10 percent of that portion of
the enroute time where the aircraft’s position cannot be “reliably fixed” at least once
each hour.
☑ The aircraft must have enough fuel to consider one instrument approach and possible
missed approach at the destination, wind and other weather conditions forecast,
anticipated traffic delays, and any other known conditions that may delay landing of the
aircraft.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

Frontier is authorized to conduct the following approaches EXCEPT

A

⚫ (SA) CAT I Approaches

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

How can the flight crew determine if an airport is “Terrain Sensitive”? (Select
ALL answers that apply)

A

☑ Via a mountain symbol at the top of the first page of the AIP
☑ Via contours published on any SID, STAR, or approach procedure

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

Which of the following statements is FALSE?

A

When a discrepancy has been entered into the aircraft logbook, ONLY MCC must be
notified.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

Who must be notified after entering a discrepancy in the Logbook?

A

MCC through the responsible dispatcher

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

Which of the following is a correct way(s) to make a correction to a logbook
entry? (Select ALL answers that apply)

A

☑ To correct a single word or phrase error, draw a line through the entry and add the
corrected information adjacent to the lined-out item.
☑ To correct an entire entry block, draw a diagonal line through the entry and write
“Entered in Error” (or “EIE”) on the diagonal line

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

How is RESERVE fuel on the flight plan calculated?

A

Reserve fuel of 45 minutes flight time is based on last cruise altitude in the flight plan.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

Which of the following logbook entries requires the captain’s signature? (Select
ALL answers that apply)

A

☑ Computer Reset
☑ Follow-up Required
☑ Flight Crew Placard

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

Which of the following best describes the MEL (Minimum Equipment List)?

A

The MEL Program allows for a temporary change in type design to address missing or
inoperative equipment in order to maintain the validity of the airworthiness certificate.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

Which of the following best describes the CDL (Configuration Deferral List)
Program?

A

The CDL Program allows for continued operations with missing secondary airframe and
engine parts.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

Which of the following best describes the NEF (Nonessential Furnishing)
program?

A

The NEF Program allows the deferral of inoperative, damaged or missing items that will
have no effect on the safe operation of the aircraft, and which are not required by
certification standards or operating rules.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

Which of the following best describes an ODM (Other Deferred Maintenance)
item?

A

⚫ ODM Items include deferrals that are “crew visibility” in nature and utilize an INFOONLY
placard to notify air crewmembers that the item on the placard has been
documented and is being tracked by the maintenance department.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

Is Frontier permitted to depart an airport VFR and then pickup an IFR clearance?

A

Yes, under certain weather conditions and provided an IFR clearance is obtained ASAP,
but no further than 50 NM from departure airport.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

What is Class II (two) navigation?

A

Any navigation conducted outside of Class I navigation.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

When is the autopilot required to be used (coupled) to conduct an approach?

A

When the weather is less than 4000 RVR (3/4 SM) and the autopilot is available for use

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

Which of the following is Frontier authorized to conduct in international airspace?

A

A “VMC Approach”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
39
Q

Prior to crossing a FIR boundary for international flights, the flight crew should
obtain the latest weather (METAR and TAF) for the destination and alternate (if
applicable).

A

True

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
40
Q

Where is Frontier authorized to conduct SLOPs?

A

Gulf of Mexico

41
Q

How does the flight crew determine snowfall intensity when determining what
holdover times to use? (Select ALL answers that apply)

A

☑ If another form of obscuration is being reported along with snow (e.g., fog/haze/smoke),
then use the Tower reported snowfall intensity.
☑ If no obscuration is present on the Tower reported snowfall intensity, then use the
“Snowfall Intensities As A Function Of Prevailing Visibility” Table located on the
DeIce Card to determine snowfall intensity.

42
Q

Anti-icing with the flaps/slats extended is permitted

A

False

43
Q

Deicing with the flaps/slats extended is permitted.

A

True

44
Q

A flight can takeoff if the holdover time expires if the flight crew performs a pretakeoff
contamination check (exit row check, and that check is satisfactory) within
5 minutes of advancing the thrust levers for takeoff.

A

True

45
Q

When does the Tarmac Delay clock start for DEPARTURES?

A

Five (5) minutes after the last passenger is boarded.

46
Q

An ARTR is required if a flight diverts to an alternate that is different from that
published on the dispatch release.

A

True

47
Q

When are security searches required? (Select ALL answers that apply)

A

☑ First flight of the day.
☑ International flights (not including Alaska).

48
Q

A flight to Puerto Rico is NOT considered an international flight for security
search purposes?

A

True

49
Q

The captain must be informed of all individuals on board carrying firearms.

A

True

50
Q

What are the 4 levels of threat? (Select ALL answers that apply)

A

☑ Level 1: Verbal
☑ Level 2: Physical
☑ Level 3: Imminent threat of death or serious bodily injury
☑ Level 4: Attempted or actual breach of the flight deck

51
Q

Where can the flight crew find a list of Ops Specs C070 approved airports?

A

Airport Information Pages

52
Q

Where can the flight crew find coded departure routes and instructions on how to
uplink these routes into the MCDU?

A

Airport Information Pages

53
Q

If an International flight diverts and does not clear customs what does the flight
need to continue to its destination?

A

A permit to proceed

54
Q

What does the TEST acronym consist of when giving the Emergency Preparation?
(Select ALL answers that apply)

A

☑ T – Type of Emergency
☑ E – Evacuation anticipated (yes/no)
☑ T – Time remaining until landing
☑ S – Signals to brace, evacuate or remain seated (review as appropriate)

55
Q

What is the purpose of the flight attendant emergency whistle (EW)?

A

To indicate a Threat Level 2, 3, or 4 situation

56
Q

When are manual engine starts recommended?

A

After aborting a start because of an engine stall, EGT overlimit, or low starter air
pressure.

57
Q

In flight, BOTH flight directors should be either ON or OFF

A

True

58
Q

Which of the following is TRUE regarding the announcement of FMA changes?

A

Workload permitting and unless specified otherwise e.g. (CAT II/III task sharing), all
FMA changes (as indicated by a white box) will be announced by the PF below FL 180.
At or above FL 180, the Vertical and Lateral Mode Changes (i.e., second and third
columns of the FMA) will be announced by the PF.

59
Q

During preflight and prior to the application of electrical power, you notice the
battery voltage is below 25.5 volts, how should you recharge the batteries?

A

Ensure external power is supplied to the aircraft and select the BAT 1 and 2 pbs to the
AUTO position.

60
Q

On the preflight check, if engine oil quantity is not displayed on the ENG SD
page, how should you check the oil quantity on NEO aircraft?

A

Set the ENG 1 and 2 FADEC GND PWR pb-sw on the overhead maintenance panel to
ON in order to display the oil qnty on the ENG SD page. After the check of the engine
oil quantity, set the ENG 1 and 2 FADEC GND PWR pb-sw to OFF.

61
Q

When is a full ADIRU alignment required?

A

Before the first flight of the day, when there is a crew change, prior to all international
flights (including Alaska) or prior to flights in Class 2 airspace.

62
Q

When is a fast ADIRU alignment required?

A

Any time the difference between the IRS position and the FMGC position exceeds 5
NM.

63
Q

During refueling, what might happen if the FUEL MODE SEL pb-sw is left in the
MAN position on the ground and the CTR TK L XFR pb-sw and CTR TK R XFR
pb-sw are not in the off position?

A

The center tank fuel transfer will not stop when the wing tanks become full and a fuel
spillage may occur.

64
Q

Just prior to pushback, if the NW STRG DISC is not displayed on the ECAM, but
the ground crew confirms that the steering selector bypass pin is in the towing
position, what must the flight crew do?

A

Make a logbook entry. Contact MCC through the responsible dispatcher

65
Q

If a heading is assigned by ATC prior to takeoff, what HDG should be preset on
the FCU to disarm NAV mode?

A

Runway HDG

66
Q

No turns in HDG mode will be commenced below ____ ft AFE (VMC) or ____ ft
AFE (IMC); unless otherwise required by the departure procedure?

A

400: 1,000

67
Q

. How could you quickly determine if you can take shortcuts off your filed route if
you are dispatched via method 2?

A

Reference the “Terrain Analysis Common Aircraft Weights” on the back of the Normal
Checklist.

68
Q

What altitude should be set on the FCU for a “Visual Approach” utilizing a
published procedure as backup reference?

A

The published missed approach altitude for the approach being used.

69
Q

What altitude should be set on the FCU for a “Visual Approach” with no
procedure backup as a reference?

A

1,500 feet AFE

70
Q

Why is entering 0.3 on the PROG page of the MCDU for RNAV approaches
required?

A

To ensure that the FMS stays in 0.3 for the missed approach rather than defaulting back
to RNP 1.0.

71
Q

Why is deselecting navaids in the MCDU for a RNAV RNP approach required?

A

In the event of GPS loss, IRS only navigation may be more accurate than DME/DME
position updating in the short term.

72
Q

Which of the following statements are TRUE if speedbrakes are used above 315
knots/M .75 with the AP engaged?

A

Rate of retraction of the speedbrakes are slow, the total time for retraction from full
extension is approximately 25 seconds.

73
Q

During the flare on landing, The PM will monitor the pitch attitude on the PFD
and call “Pitch” whenever approaching/or reaching what pitch attitudes? (Select
ALL answers that apply)

A

☑ A 319 or 320: 10° pitch attitude
☑ A 321: 7.5° pitch attitude

74
Q

When should the after landing checklist be called for?

A

After clearing the runway and the aircraft is safely established on a taxiway, but not
before taxi/runway crossing restrictions are clearly understood by both crewmembers.

75
Q
  1. After landing, how long should we wait before starting the APU?
A

2 minutes after stowing the Thrust Reversers.

76
Q

After taxi-in and during parking, you attempt to shut down an engine (you move
the ENG MASTER 1 or 2 to OFF). However, the engine does not shut down.
What should you do?

A

Switch the affected master lever ON, then OFF. If the engine still fails to shut down,
press the affected ENG FIRE pushbutton.

77
Q

After parking the aircraft, you notice a maintenance status message (Class 2
message). A logbook write-up is required for the class 2 message that disappeared.

A

True

78
Q

Which of the following statements should be followed when performing the
Securing Checklist? (Select ALL answers that apply)

A

☑ After having switched off the ADIRS, wait at least 10 seconds before switching off the
electrical supply to ensure that the ADIRS memorize the last data.
☑ Wait at least 5 minutes after BLOCK IN to accomplish the securing procedure to allow
the FMGC/AOC to complete the DONE PHASE and enter the PREFLIGHT PHASE.

79
Q

In flight prior to manipulation, both the Pilot Flying (PF) and Pilot Monitoring
(PF) must confirm. (Select ALL answers that apply)

A

☑ Engine master switches, IR selector, All guarded controls.
☑ Thrust Levers (During an ECAM or QRH procedure)

80
Q

In most situations, the following sequence is the basic one that should be followed
by the flight crew during an abnormal/emergency situation.
1. Memory Items,
2. OEBs,
3. ECAM,
4. QRH Procedures, then
5. Abnormal & Emergency Procedures (time permitting).
However, this sequence may not cover all operational situations. Therefore, the
flight crew should exercise their judgement and adapt the sequence of actions to
the real conditions

A

True

81
Q

For an abnormal procedure during approach, perform the normal checklist first,
then the ECAM/ABNORMAL procedure or checklist.

A

False

82
Q

For an abnormal procedure during takeoff, perform the AFTER TAKEOFF
checklist first, then the ECAM/ABNORMAL procedure or checklist. (Not
applicable to Engine Fire, Oil Lo Press, Eng. Overlimit, Engine Failure, and
Engine Stall)

A

True

83
Q

Which of the following statements are TRUE? (Select ALL answers that apply)

A

☑ If red LAND ASAP is part of the ECAM procedure, land as soon as possible at the
nearest airport at which a safe landing can be made.
☑ If amber LAND ASAP is part of the ECAM procedure, consider landing at the nearest
suitable airport.

84
Q

While performing an ECAM for an engine failure, the pilot flying (PF) will call
“Stop ECAM Actions” prior to the pilot monitoring (PM) reading the ______ page
in order to complete the after takeoff checklist.

A

Status

85
Q

What is the purpose of an ECAM advisory?

A

An ADVISORY informs the crew that a parameter is approaching a limitation and
enables the flight crew to monitor the drifting parameter.

86
Q

Where can the flight crew find triggering conditions for various ADVISORY
situations or associated recommendations for an ECAM ADVISORY?

A

QRH procedure section

87
Q

What is the purpose of the “Summary” sections within the QRH?

A

To help the flight crew perform actions in the case of an ELEC EMER CONFIG or dual
hydraulic failure.

88
Q

Where can the flight crew find the Computer Reset Table?

A

QRH procedure section

89
Q

Where can you find Frontier’s procedures on Engine Out Standard Instrument
Departures (EOSID’s) as well as Complex Missed Approaches utilizing an
EOSID?

A

FOM VOL II – Supplementals – Special Procedures and/or the AIPs

90
Q

Crews operating at airports that utilize EO Complex Procedures shall set up and
brief the procedure to be ready for an engine failure.

A

True

91
Q

When performing the Class 2 Nav Accuracy check, FM position is considered
reliable if

A

Error ≤ 3NM

92
Q

When performing the Class 2 Compass Deviation Check, all headings should be
within ____ degrees of each other?

A

5

93
Q

Which of the following statements is TRUE?

A

Compliance with a TCAS II resolution advisory (RA) is required unless the captain
considers it unsafe to do so, or unless the pilot has better information about the cause of
the RA and can maintain safe operation.

94
Q

If the engines and/or landing gear need to be deiced, what actions must be taken?

A

A logbook entry. Notify MCC through the responsible Dispatcher so the engines and/or
landing gear are deiced properly.

95
Q

Do not move flaps or slats, flight control surfaces, or trim surfaces, if they are not
free of ice.

A

True

96
Q

When must ENGINE ANTI-ICE be ON? (Select ALL answers that apply)

A

☑ During all ground and flight operations when icing conditions exist or are anticipated,
except during climb and cruise when the SAT is below -40°C.
☑ During descent in icing conditions, even if the SAT is below -40°C.

97
Q

When should WING ANTI-ICE be selected on?

A

In flight, whenever there is indication that airframe icing exists.

98
Q

Takeoff in moderate and heavy freezing rain is prohibited

A

True

99
Q

After landing, if flaps/slats are NOT free of contamination, leave flaps/slats in the
current configuration. Coordinate with ground/deice crew for cleaning/deicing of
the flaps/slats prior to flap retraction

A

True