PPL - NAVIGATION

Question 1

1. The meaning of VOR is:
   a. very high range
   b. very high frequency omni directional range
   c. omni directional

Answer 1

b. very high frequency omni directional range

Question 2

2. The frequency allotted for the VOR:
   a. 118.00 MHz – 135 MHz
   b. 108 MHz – 111 MHz
   c. 108 MHz – 117.95 MHz

Answer 2

c. 108 MHz – 117.95 MHz

Question 3

3. VOR station transmit radio beams called:
   a. bearings
   b. magnetic bearings
   c. radials

Answer 3

c. radials

Question 4

4. What are the three (3) kinds of VOR stations?
   a. Short, medium and long
   b. Terminal, low and high altitude
   c. Enroute VOR, approach VOR and station VOR

Answer 4

b. Terminal, low and high altitude

Question 5

5. You should always identified the VOR before using by checking:
   a. morse code Identifier
   b. errors
   c. accuracy

Answer 5

c. accuracy

Question 6

6. What is an advantage of the VHF frequency used for VOR
   navigation?
   a. You can received AM radio broadcast over your VOR on this
   frequencies.
   b. VHF frequencies are not limited by mountains or curvature of the
   earth.
   c. VHF radio waves are less susceptible to the interference than
   low frequency radio waves

Answer 6

c. VHF radio waves are less susceptible to the interference than
low frequency radio waves

Question 7

7. What navigation capability does a VOR/DME provide?
   a. Position and distance
   b. Position only
   c. Distance only

Answer 7

a. Position and distance

Question 8

8. Why is it important to set your VOR indicator to generally agree with
   your intended course?
   a. To avoid being drifted
   b. To avoid reverse sensing
   c. To proceed the VOR station

Answer 8

b. To avoid reverse sensing

Question 9

9. If the CDI is deflected 3 dots to the right of your VOR indicator and
   heading indicator are in general agreement, where is your desired
   course:
   a. 6° left
   b. 3° right
   c. 6° right

Answer 9

c. 6° right

Question 10

13. What is the ADF frequency range?
    a. 190 – 535 kHz
    b. 535 – 1605 kHz
    c. 190 – 106 kHz

Answer 10

a. 190 – 535 kHz

Question 11

14. What is the meaning of ADF?
    a. Automatic Direction Frequency
    b. Automatic Direction Finder
    c. Automatic Direction Fix

Answer 11

b. Automatic Direction Finder

Question 12

15. NDB means?
    a. Non-directional beacon
    b. Non-directional Beam
    c. Non-direction Broadcast

Answer 12

a. Non-directional beacon

Question 13

16. ADF requires two antennas:
    a. directional antenna and sense antenna
    b. beacon antenna and sense antenna
    c. beacon antenna and directional antenna

Answer 13

a. directional antenna and sense antenna

Question 14

17. A kind of ADF where the nose of the aircraft is always 0°:
    a. movable Card
    b. fixed Card
    c. radio magnetic Card

Answer 14

b. fixed Card

Question 15

18. A heading that will bring the aircraft to the NDB stations:
    a. relative Bearing
    b. magnetic Heading
    c. magnetic Bearing

Answer 15

c. magnetic Bearing

Question 16

19. The angular difference between the nose and the NDB station
    measure clockwise.
    a. Relative Bearing
    b. Magnetic Heading
    c. Magnetic Bearing

Answer 16

a. Relative Bearing

Question 17

20. A heading based on the Magnetic Compass.
    a. Relative Bearing
    b. Magnetic Heading
    c. Magnetic Bearing

Answer 17

b. Magnetic Heading

Question 18

21. Magnetic heading plus relative bearing equals.
    a. Relative Bearing
    b. Magnetic Heading
    c. Magnetic Bearing

Answer 18

c. Magnetic Bearing

Question 19

22. A technique in flying the NDB by keeping the needle of the ADF on
    the aircraft nose:
    a. tracking
    b. homing
    c. bracketing

Answer 19

b. homing

Question 20

23. ADF equipment is capable of receiving signals from what type of
    facility?
    a. Any FM radio stations
    b. NDB and AM commercial broadcast station
    c. Specially equipped VOR stations

Answer 20

b. NDB and AM commercial broadcast station

Question 21

24. It is the horizontal direction from 1 point to another; it can be
    measured clockwise in degrees from any reference point.:
    a. bearing
    b. heading
    c. relative Bearing

Answer 21

a. bearing

Question 22

NOT INCLUDED:
#10-12
#31-40