Powerplant

Question 1

An in-flight starter assisted start utilizes _______ ______ only.

Answer 1

An in-flight starter assisted start utilizes battery power only.

Question 2

During normal operations, Engine sync will be displayed as a ______ _____ annunciation above the N₁ tapes.

Answer 2

During normal operations, Engine sync will be displayed as a green SYNC annunciation above the N₁ tapes.

Question 3

Engine Sync is normally __________ and is available ______ idle and _______ takeoff rated thrust.

Answer 3

Engine Sync is normally automatic and is available above idle and below takeoff rated thrust.

Question 4

With the ignition switch in the Norm position, ignition is controlled by the _______.

Answer 4

With the ignition switch in the Norm position, ignition is controlled by the FADEC.

Question 5

During engine start, ITT rise should be seen within ___ seconds of throttle out of cutoff.

Answer 5

During engine start, ITT rise should be seen within 15 seconds of throttle out of cutoff.

Question 6

During engine start, the throttle should be brought to idle at ___% N₂ minimum.

Answer 6

During engine start, the throttle should be brought to idle at 9% N₂ minimum.

Question 7

An engine start should be aborted if stabilized ground idle is not seen within ___ seconds of engine light up. Normal ground idle is ___ to ___% N₂.

Answer 7

An engine start should be aborted if stabilized ground idle is not seen within 90 seconds of engine light up. Normal ground idle is 57 to 59% N₂.

Question 8

An engine start should be aborted if N₁ rotation is not seen prior to _____% N₂.

Answer 8

An engine start should be aborted if N₁ rotation is not seen prior to 40% N₂.

Question 9

A low oil quantity will be indicated by an ______ Oil Level Low CAS message.

Answer 9

A low oil quantity will be indicated by an amber Oil Level Low CAS message.

Question 10

The engine start process is complete when the ____ Engine Shutdown CAS message extinguishes.

Answer 10

The engine start process is complete when the cyan Engine Shutdown CAS message extinguishes.

Question 11

When pressed, the event marker button causes a ___ minutes recording of engine parametersin the EDU for later inspection.

Answer 11

When pressed, the event marker button causes a 5 minutes recording of engine parametersin the EDU for later inspection.

Question 12

An Amber N₁ target bug indicates that the same _____ ________ is setting both engine fuel and the ____ target. I.E. there is no crosscheck.

Answer 12

An Amber N₁ target bug indicates that the same FADEC channel is setting both engine fuel and the N₁ target. I.E. there is no crosscheck.

Question 13

The cyan Engine Shutdown CAS message illuminates on the EICAS following a _____ ______ engine shutdown.

Answer 13

The cyan Engine Shutdown CAS message illuminates on the EICAS following a pilot initiated engine shutdown.