Flight Controls Flashcards
Roll control is provided by __________ operated ailerons and __________ operated spoilers.
Roll control is provided by mechanically operated ailerons and hydraulically operated spoilers.
The _____ control column connects directly to the ailerons and the ______ control column connects directly to the spoiler system.
The left control column connects directly to the ailerons and the right control column connects directly to the spoiler system.
Spoiler panels 2, 3, 4 and 7, 8, 9 (middle 3 on each wing) operate as ______ and speed brakes, while panels 1, 5, 6, and 10 (inner and outer panels on each wing) operate as ______ _______ only.
Spoiler panels 2, 3, 4 and 7, 8, 9 (middle 3 on each wing) operate as spoilers and speed brakes, while panels 1, 5, 6, and 10 (inner and outer panels on each wing) operate as speed brakes only.
Pitch control is provided by __________ operated elevators.
Pitch control is provided by mechanically operated elevators.
The ____ column connects to the left elevator and the _____ control column connects to the right elevator.
The left column connects to the left elevator and the right control column connects to the right elevator.
The Pitch/Roll Disconnect handle disconnects the left and right pitch and roll systems and can/cannot be reconnected in flight.
The Pitch/Roll Disconnect handle disconnects the left and right pitch and roll systems and can be reconnected in flight.
Primary pitch trim is accomplished by an ________ controlled movable horizontal stabilizer.
Primary pitch trim is accomplished by an electrically controlled movable horizontal stabilizer.
Flaps are operated _________.
Flaps are operated electrically
Lateral control is provided by a ___________ operated rudder.
Lateral control is provided by a mechanically operated rudder.
Rudder bias uses _____ ____ pressure to assist with lateral control during engine failures.
Rudder bias uses bleed** **air pressure to assist with lateral control during engine failures.
Roll trim is accomplished through 1 or 2 ________ operated aileron trim tabs.
Roll trim is accomplished through 1 or 2 electrically operated aileron trim tabs.
The gust lock _________ locks the primary flight controls and restricts the _____ throttle to approximately midway between _____ and CRU.
The gust lock mechanically locks the primary flight controls and restricts the left throttle to approximately midway between IDLE and CRU.
