Pneumatics Flashcards
Pneumatic system air is supplied by:
- ______ Pressure or ____ Pressure bleed or from each engine
- OR- - _____ bleed air.
Pneumatic system air is supplied by:
-
High Pressure or Low Pressure bleed or from each engine
- OR- - APU bleed air.
With the Bleed Air Selector in NORM, HP and LP selection is _________.
With the Bleed Air Selector in NORM, HP and LP selection is automatic.
Selecting the Bleed Air Selector knob to OFF closes the _______ ______ ________ valve.
Selecting the Bleed Air Selector knob to OFF closes the Bleed Air** **Shutoff valve.
The Pylon Precooler uses ______ air to cool the bleed air from the engines before it enters the pneumatic system.
The Pylon Precooler uses bypass air to cool the bleed air from the engines before it enters the pneumatic system.
Some bleed air from the engines is used to supply service air. Service air is used to:
- Inflate the ______ ______ ______.
- Provide vacuum for the ______ valves.
- Provide motive flow for the ______ water aspirator.
Some bleed air from the engines is used to supply service air. Service air is used to:
- Inflate the acoustic door seal.
- Provide vacuum for the outflow valves.
- Provide motive flow for the ACM water aspirator.
APU service air is supplied any time the APU is running, With APU ______ ______ on or off.
APU service air is supplied any time the APU is running, With APU bleed air on or off.
Bleed leak detection is available along the _______ lines.
Bleed leak detection is available along the pneumatic lines.
The pressure source selector controls bleed air from the engines for _____________ and __________ only.
The pressure source selector controls bleed air from the engines for environmental and pressurization only.
The baggage heat is only available ___ ______ with _____ engine bleed air.
The baggage heat is only available in flight with left engine bleed air.
An HP Valve Fail CAS message indicates that the HP valve is in the _______ __________.
An HP Valve Fail CAS message indicates that the HP valve is in the wrong position.
With a Stab Bleed Leak CAS message, the ____ anti-ice will automatically shut off.
With a Stab Bleed Leak CAS message, the stab anti-ice will automatically shut off.
Emergency Pressurization air is supplied by the ____ engine and activates automatically with:
- _____ Bleed Leak.
- _____ overtemperature.
- Cabin altitude above _______.
Emergency Pressurization air is supplied by the ____ engine and activates automatically with:
- ACM Bleed Leak.
- ACM overtemperature.
- Cabin altitude above 14,500.