Avionics Flashcards
The avionics can be on during engine start, if it is not below ____ ºC and the electrical system is powered by something beside _______ power.
The avionics can be on during engine start, if it is not below 0 ºC and the electrical system is powered by something beside battery power.
Emergency Decent mode is active when:
- Aircraft is above FL____.
- _________ is engaged.
- Cabin altitude above ______.
Emergency Decent mode is active when:
- Aircraft is above FL310.
- Autopilot is engaged.
- Cabin altitude above 14,500.
When the Emergency Descent Mode activates:
- The altitude preselector is set to _______ feet.
- The heading bug slews ____ degrees to the left.
- The autopilot inititates a left turn and a pitch down to descend at ____/_____ minus 10 and an Emer Descent message is seen on the PFD.
When the Emergency Descent Mode activates:
- The altitude preselector is set to 15,000 feet.
- The heading bug slews 90 degrees to the left.
- The autopilot inititates a left turn and a pitch down to descend at VMO/MMO minus 10 and an Emer Descent message is seen on the PFD.
A magnetic heading display will appear on the standby flight display __________ if the standby slave switch is in _____ and the standby HSI fails.
A magnetic heading display will appear on the standby flight display automatically if the standby slave switch is in AUTO and the standby HSI fails.
Navigation information will appear on the standby flight display __________ if the standby HSI fails.
Navigation information will appear on the standby flight display automatically if the standby HSI fails.
When operating on the Emergency Bus, the left MCDU, Comm __, Nav ___, ADF ___ and Transponder ___ will continue to operate for ___ hour.
When operating on the Emergency Bus, the left MCDU, Comm 1, Nav 1, ADF1 and Transponder 1 will continue to operate for 1 hour.
An amber LOC 1 indication on the pilot PDF indicates that both pilot and copilot have selected _____ as their Nav source.
An amber LOC 1 indication on the pilot PDF indicates that both pilot and copilot have selected LOC 1 as their Nav source.
The EICAS Display is normally found on DU_, but can be selected to DU_ with the EICAS button.
The EICAS Display is normally found on DU2, but can be selected to DU3 with the EICAS button.
During a loss of ADC information, or a miscompare, data from the _____ ADC can be selected for display using the ___ __________ button.
During a loss of ADC information, or a miscompare, data from the opposite ADC can be selected for display using the ADC REVERSION button.
During a loss of attitude or heading information, or a miscompare, data from the ______ AHRS can be selected for display using the _____ _____________ button.
During a loss of attitude or heading information, or a miscompare, data from the opposite AHRS can be selected for display using the ATT/HDG REVERSION button.
Pressing the center button on the left CCD will select DU_ for control of by the CCD.
Pressing the center button on the left CCD will select DU2 for control of by the CCD.
Pressing the EMER button on the Digital Audio Panel routes audio direcctly to the __________ and sets the microphone to transmit on Comm __.
Pressing the EMER button on the Digital Audio Panel routes audio direcctly to the headphones and sets the microphone to transmit on Comm 1.
The oxygen mask microphone is activated by selecting _____ on the MIC SELECT button.
The oxygen mask microphone is activated by selecting MASK on the MIC SELECT button.
The No Takeoff CAS message alerts the crew when attempting to takeoff with the aircraft not configured for ________.
The No Takeoff CAS message alerts the crew when attempting to takeoff with the aircraft not configured for takeoff.
