Electrical Power Systems Flashcards

1
Q

Bus tie operation is ________ on the ground and _______ in flight.

A

Bus tie operation is automatic on the ground and manual in flight.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

The minimum battery voltage for engine start is ___ volts.

A

The minimum battery voltage for engine start is 24 volts.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

The electrical system is ______ _____.

A

The electrical system is split bus.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

The Avail light on the External Power Switch indicates EPU is connected and _______ is within acceptable range.

A

The Avail light on the External Power Switch indicates EPU is connected and voltage is within acceptable range.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

The EPU receptable is/is not monitored.

A

The EPU receptable is not monitored.

Visually verify that it is disconnected!!!!

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

With the generator switches in the on position, the generators will/will not come on automatically after engine start.

A

With the generator switches in the on position, the generators will come on automatically after engine start.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Batteries are used for all starts, except ________ starts.

A

Batteries are used for all starts, except windmilling starts.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

The Interior button removes power from the aft cabin, except the _________ lights.

A

The Interior button removes power from the aft cabin, except the emergency lights.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

The standby power is tested by selecting the _____ position of the switch for ___ seconds.

A

The standby power is tested by selecting the TEST position of the switch for 10 seconds.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

The standby battery will provide ____ minutes of standby bus power.

A

The standby battery will provide 180 minutes of standby bus power.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

When following the checklist, a minimum of ___ minutes of emergency bus power will be available.

A

When following the checklist, a minimum of 60 minutes of emergency bus power will be available.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Remote CB Tripped CAS message indicates that a breaker in the _____ ______ has tripped.

A

Remote CB Tripped CAS message indicates that a breaker in the aft J-Box has tripped.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

With a single generator failure, the remainining generator is available to power the entire electrical system. True/False

The ___ ____ can be used to tie the left and right side of the electrical system together.

A

With a single generator failure, the remainining generator is available to power the entire electrical system. True

The bus tie can be used to tie the left and right side of the electrical system together.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

The R and L ELEC buttons disconnect the _____ ____ from the __________ _____ and are used primarily for _____ _____ during electrical failure.

A

The R and L ELEC buttons disconnect the main bus from the emergency bus and are used primarily for load shed during electrical failure.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

The Sovereign has two __-Amp/hour _____ batteries.

A

The Sovereign has two 44-Amp/hour Ni-Cad batteries.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Primary DC electrical power is provided by:

___, ____ and ___ ________.

A

Primary DC electrical power is provided by:

APU, EPU and main generators.

17
Q

The following items are powered by the battery bus:

______ Compartment Lights, ______ work lights, ____ service panel, ______ maintenance lights, _____ entry lighting, ELT control panel, ____ and ____ battery voltages, lavatory service panel, and NWS accumulator panel.

A

The following items are powered by the battery bus:

Baggage** Compartment Lights, **pylon work lights, APU service panel, tailcone maintenance lights, cabin entry lighting, ELT control panel, right and left battery voltages, lavatory service panel, and NWS accumulator panel.