Physics, Monitoring, and Anesthesia Delivery Devices Flashcards
How do you calculate vaporizer output?
vaporizer output = carrier gas flow x SVP
Patm - SVP
**SVP: saturated vapor pressure of anesthetic gas**
What are the components of Poiseuilles’s equation for laminar flow through a tube?
flow = πr4 x deltaP
8 x viscosity x L
L: length of tube
deltaP: driving pressure
What is the pressure and volume in a full oxygen cylinder?
2200 psi
700 L
What is the pressure and volume in a full nitrous oxide cylinder?
750 psi
1600 L
What is the pressure from the wall source of oxygen or nitrous oxide?
50 psi
What does the first stage pressure regulator bring the pressure from the O2 and nitrous oxide tanks down to?
45 psi
When does the pressure in a nitrous oxide tank start to fall?
When it is 75% depleted (i.e., 400 L)
How do you convert g of nitrous oxide to L?
44 g = 22.4 L
** Avogadro’s hypothesis: 1 mole takes up 22.4 L **
What is the SVP (saturated vapor pressure) of the common anesthetic gases?
sevoflurane: 160 mmHg
enflurane: 172 mmHg
isoflurane: 240 mmHg
halothane: 243 mmHg
desflurane: 680 mmHg
How is radiation risk related to distance from the source?
radiation risk is inversely proportional to (distance from the source)2
What is the Reynold’s number the distinguishes laminar and turbulent flow?
< 2000 is laminar
>2000 is turbulent
Which type of flow is most dependent on gas/fluid viscosity? Density?
- Turbulent flow depends on density
- Laminar flow depends on viscosity
How is flow different at the top and the bottom of the flowmeter?
- Upper part of the flowmeter has turbulent flow (Top=Turbulent)
- Lower part of the flowmeter has laminar flow (Low=Laminar)
What color are gas cylinders in the US?
oxygen - green
nitrous oxide - blue
air - yellow
carbon dioxide - gray
nitrogen - black (“Nigga=black”)
helium - brown
What are the causes of rebreathing in the circle system?
- exhausted CO2 absorbent
- incompetent expiratory valve (more common)
- incompetent inspiratory valve (less common)