NAVAL CONSTRUCTION FORCE/SEABEE 1&C; CHAPTER 3,4,6,9 Flashcards
how many working days is the interval between PM service inspection for NCF equipment?
40
what provides an opportunity to document that the crew leader has demonstrated the capability to carry out assigned projects?
RDE
who is responsible for developing an aggressive QC plan for each project?
Crewleader
what is the most common source of informal training?
OJT
What is responsible for inspection and surveillance of ongoing Seabee projects?
FEAD
A utility interruption request form should be submitted to ops at least how many weeks in advance of required outage?
2 weeks
What is the most important phase of project planning?
Material take off
How often does the battalion Receive a PSR/PCR showing the status of all project materials?
Monthly
Materials should only requestioned that you will need over what tine frame?
two weeks
What form is all material requestioned on?
NAVSUP Form 1250-1
For requestion materials that have to be obtained from conus locations, allow at least 60 days for normal requisitions and how many days for long lead items?
120 days
when a job is completed, all remaining materials must be offers to the customer. Materials the customer does not want are stored in MLO for how many months?
6 months
what document identifies structures and supporting utilities of the navy ABFC?
FPG
What is defined as a grouping of personnel and material that has a specific function or mission at an advanced base?
Component
Components are usually ordered only under a mobilization situation and requested through whom?
CNO
To meet requirements for contingency support of the naval task force and the fleet marine task force, PHIBCBs and CBUs must be able to redeploy within three and how many days?
6
During the first 30 days after return to homeport, Each NMCB must be capable of deploying an air detachment within how many hours?/
48
While deployed, NMCBs should be able to redeploy within how many days?
6
The five types of containers used during embarkation include: Standard 20s, TRICONS, flat tracks, Half-heights and what else?
SIXCONS
at a minimum how many amphibious/MSC/air exercises will be scheduled per deployment?
1
what is responsible for controlling all items being airlifted?
DACG
All hazardous material to be airlifted must be properly packed and handled in strict compliance with what publication?
NAVSUP PUB 505
To prolong the 463L pallet life do not exceed a pallet load of how many pounds?
7,500 lbs
never stack pallets over how many high?
40
vehicles are not permitted to park within how many feet of an aircraft?
25
during embarkation each individual should have sufficient water and rations to last for how many hours?
24 hrs
what container is used primary for shipment of drummed oils and lubricants?
Half-height
What is the primary transport service of the DOD?
AMC
What pallet is the standard system for the movement of concentrated cargo used by the air force?
463L
How many basic embarkation plans are normally prepared by the various command levels within the landing force?
3
what is used to ship bulky items such as lumber, steel products and piping?
Flat racks
Who is designated as the functional manager for implementation of TC-AIMS II for the NAVY?
COMNAVSUPSYSCOM
In the vicinity of an aircraft ear muff pr ear plugs are required when the dB is in what range?
85-100
When properly attached tp the 463L pallet, pallet nets can provide adequate restraint for how many lbs. of cargo?
10,000 LBs
How many lbs does a 463l pallet weigh when emoty?
290
what is the farthest point of a vehicle?
RDL
Embarking on an aircraft requires special loading procedures for several types of CESE assigned to the battalion TOA. Where are the procedures outlined?
NTTP 4-01.5
What must the airlift request be prepared to according to?
OPNAVINST 4630. 18
Under normal operations, how many type of aircraft does the NCF use for embarkation?
4
what is the peacetime preliminary load plans for an ACL for C-17?
153,500 lbs
what is the peacetime preliminary load plans for an ACL for C-130?
25,000 lbs
Who is responsible for maintaining a systematic, Continuous inspection program for all camp facilities, utility systems, and equipment?
Maintenance Chief
How often must the CMO review the trouble call log?
weekly
how many key elements of the maintenance management system are there?
5
who is responsible for acquisition planning and contract administration of construction and service contracts from design to delivery?
FEAD
How many classifications of work are used at public works?
5
