Masonry Flashcards
Veneer are what?
Thin bricks adhered in place of standard size - 117
Standard size Mortar Joint ?
3/8” - 119
Brick Bonds (Figure ______), Identify Header
7-29. -
127-129
Tooled Joints
Shaping and compression of mortor - 130
Use Two Core block With
Rebar - 157
Actual Size block figure…….
8-12 - 158-159
Mortar Mix, (Trade Tip)
Lime mortor exhibits greater flexural strength - 187
Types Of Mortar_________.
M,S,N,O&K 191 - 193
Cubic Feet Of Mortar Required, figure_______
10-10 - 197
Increasing The Amount Of Water In Grout Will Increase The Likelihood Of?
Particle Segregation - 199
Unit Ties and Anchor Types figure________
206 / FIG. 11-3
Furrowing Mortar Makes A?
More Uniform Bed - 222 / FIG. 12-7
Important factor with wall ties?
Place wall ties 5/8” from edge of masonry unit - 245
Figure 13-48, page _______Figure 16-27, page_______
277, 340 - 290
Brick Veneer Is A
Non-Load Bearing Wall - 262
Depth For Control Joints In Block Walls?
3/4” - 274
Process of damproofing a foundation?
3/8” portland cement from the footing to 6” above grade. - 318 / FIG. 15-8
Max. Height Of Masonry Columns?
25 Times Least Dimension - 319
A Brick Veneer Wall Is?
A non load bearing Curtain Wall - 328
Parts Of Masonry Arch, figure_________?
353 / FIG. 16-56
Slope For Paver Drainage?
1/8 - 1/4 Inch - 366
Calcium Chloride Used As?
Accelerating Add Mixture, not more than 2% - 386
Welded Wire Mesh (WWM) Should Be Lapped, how?
A Stay Plus 2” - 398 / FIG. 18-33
What is Tuckpoint?
Filling in old mortor joint with fresh mortor
