Kahoot Questions: Networking +5

Question 1

What is the purpose of a subnet mask in an Ip address and mask combination

a. ) To indicate the default gateway IP address
b. ) To dictate the physical location of the address
c. ) to save on the possible addresses that you can use in the network
d. ) to delineate the network portion of the address from the host portions

Answer 1

d.) to delineate the network portion of the address from the host portions

Question 2

What does VLSM stand for?

a. ) Visual link Standard Message
b. ) Variable Length Subnet Mask
c. ) Very long Subnet Mask
d. ) Variable Length Standard Mask

Answer 2

b.) Variable Length Subnet Mask

Question 3

binary value 0010000

Answer 3

16

Question 4

what command would you use on a Microsoft Windows system to find out your IP address at the command line?

a. ) ifconfig
b. ) ipconfig
c. ) intconfig
d. ) addconfig

Answer 4

b.) ipconfig*

Question 5

How many bits in one of the four octets of an IP address?

a,) 4

b. ) 8
c. ) 16
d. ) 32

Answer 5

b.) 8

Question 6

What is the default subnet mask for a Class A address?

a. ) 255.0.0.0
b. ) 255.255.0.0
c. ) 255.255.255.0
d. ) 255.255.255.255

Answer 6

a.) 255.0.0.0

Question 7

To test the IP stack on your local host, which IP address will you ping?

a. ) 127.0.0.0
b. ) 1.0.0.127
c. ) 127.0.0.1
d. ) 255.255.255.0

Answer 7

c.) 127.0.0.1

Question 8

which of the following is true of a Switch?

a. ) Switches forward packets based on IP address
b. ) Switches forward packets based on MAC address
c. ) Switches forward packets based on IPX address
d. ) Switches forward packets based on Layer3 protocol

Answer 8

b.) Switches forward packets based on MAC address

Question 9

An IP address consists of ___ bits

a. ) 4
b. ) 8
c. ) 32
d. ) 24

Answer 9

c.) 32

Question 10

identify the class of IP address 229.1.2.3

a. ) Class A
b. ) Class B
c. ) Class C
d. ) Class D

Answer 10

d.) Class D

Question 11

Which class has the greatest number of hosts per given network address?

a. ) A
b. ) B
c. ) C
d. ) D

Answer 11

a.) A

Question 12

On a network that uses NAT, which device has a translation table

a. ) Server
b. ) Switch
c. ) Router
d. ) None of the above

Answer 12

c.) Router

Question 13

What is the primary purpose of the OSI model?*

a. ) It is a six layer protocol that represents the Cisco IOS system
b. ) It is a seven layer model used to differentiate among IP address
c. ) It is responsible for maintaining communication among different components
d. ) It is a logical division of computers network architecture into 7 layers

Answer 13

d.) It is a logical division of computers network architecture into 7 layers*

Question 14

What is the default subnet mask for a Class B address?

a. ) 255.0.0.0
b. ) 255.255.0.0
c. ) 255.255.255.0
d. ) 255.255.255.255

Answer 14

b.) 255.255.0.0

Question 15

Which device is typically used to allow communication among two or more networks?*

a. ) RJ45 cable
b. ) Ethernet cable
c. ) Proxy Firewall
b. ) Router

Answer 15

b.) Router

Question 16

How does a switch discover other devices?

a. ) It sends an ARP request
b. ) It sends a DNS request
c. ) It sends a DHCP request
d. ) It sends an FTP request

Answer 16

d.) It sends an ARP request

Question 17

How many bits are assigned to the network portion in the classful subnetting for a Class C network?

a. ) 16 bits
b. ) 24 bits
c. ) 32 bits
d. ) 64 bits

Answer 17

b.) 24 bits

Question 18

In dynamic routing there is RIP, OSPF and ___?

a. ) EIGRP Protocol
b. ) SYN/ACK Protocol
c. ) NCC1701 Protocol
d. ) ICMP protocol

Answer 18

a.) EIGRP Protocol

Question 19

Layer 5 of the OSI model is also referred to as:

a. ) Session Layer
b. ) Application Layer
c. ) Transport Layer
d. ) Presentation Layer

Answer 19

a.) Session Layer

Question 20

A type of port assigned to carry traffic from all the VLANs connected to a specific network switch is known as:

a. ) Default gateway
b. ) Trunk port
c. ) Registered port
d. ) Mirrored Port

Answer 20

b.) Trunk port