IEQ (Indoor Environmental Quality) Advanced 1 Flashcards
How many prerequisites are there for IEQ and what are they?
2 prerequisites
P1. Minimum indoor air quality performance
P2. Environmental tobacco smoke control
How many credits are there for IEQ and what are they?
9 credits
How does an engineer determine if natural ventilation is feasible?
By using the CIBSE Application Manual AM10 flowchart
What percentage of individual occupant spaces AND shared multi-occupant spaces must have lighting controls?
90% of individual occupant spaces
100% of multi-occupant spaces
What is required for healthcare projects to meet IEQ C , Construction IAQ Management Plan that other project types are not required to include?
EQMP (Environmental Quality Management Plan)
What are the 3 acceptable forms of documentation for documenting low-emitting products?
- testing reports
- MSDS
- third party certification
What action is required for a project to earn IEQ C , Daylight?
Take daylight measurements in regularly occupied spaces X months from completion???
What is the threshold for an sDA simulation?
Question 28
300 lux, 50%?..
For a flush out while the building is UNOCCUPIED, what quantity of outside air must be introduced to the project space?
14,000 cu ft per square foot of floor area
For a flush out while the building is OCCUPIED, what quantity of outside air must be introduced to the project space?
3,500 cu ft per square foot of the floor area and must continue until 14,000 cu ft of outdoor air is introduced
Question 37
A
Under what circumstances must testing for air quality occur to meet IEQ C , IAQ Assessment?
During normal occupied hours and while operating at a minimum outdoor airflow rate
What 3 options can a project do to earn points for IEQ C, Enhanced IAQ Strategies Option 2 Additional Enhanced IAQ Strategies?
- Exterior contamination prevention
- Additional source control and monitoring
- Natural ventilation room by room calculations
What is the calculation for an occupied flush-out to achieve IEQ C, IAQ Assessment?
Occupied = 0.3 cfm per total square foot
Example 1. 100,000sf building = 100,000 x 0.3 = 30,000 cfm
Under what circumstances will a project not have to address exterior noise?
Building is located 1/2 mile from any significant noise source