Holding Procedures

Question 1

Outbound leg duration above 14,000ft

Answer 1

1.5 minutes

Question 2

Outbound leg duration below 14,000ft

Answer 2

1 minute

Question 3

Offset join

Answer 3

Fix ac to be offset by 30 degrees from reciprocal of inbound
Then turned right

Question 4

When do outbound timings begin in holding pattern

Answer 4

At the fix or abeam the fix whichever is later

Question 5

Sector 1

Answer 5

Parallel

Question 6

Sector 2

Answer 6

Offset

Question 7

Sector 3

Answer 7

Direct

Question 8

Standard Minimum Obstacle Clearance in holding pattern is

Answer 8

300m

Question 9

MOC in holding pattern in mountainous areas

Answer 9

600m

Question 10

DME limiting distance

Answer 10

The point the aircraft reaches to turn to intercept the inbound track back to the fix

Question 11

Departing the pattern - clearance what to do

Answer 11

Adjust the pattern within the limit to establish holding procedures in order to leave the holding point at the time specified

Question 12

Bank angle and rate of turn in hold

Answer 12

All turns made at bank angle of 25 degrees or a rate of 3 degrees per second whichever requires less