Flows And Memory Items Flashcards
What is the start of programming mnemonic
DIFFRIPP
DIFFRIPP meaning
D-database
I-init A
F-Flight plan
F- sec Flight plan (copy active)
R-radio nav aids for dep
I-init B (weight, fuel, etc)
P-perf
P-prog
What external lights needed on preliminary cockpit scan
Strobes auto and logo lights on
When is take off briefing and emergency briefing completed
After PF has done preliminary cockpit scan
When does PF ask for before start checklist to the line?
After emergency briefing
When does the PM make PA announcement
Once before start checklist to the line is completed
Once ATC clearance for push and start received, what are PM memory actions
- Windows/doors checked
- ATC XPNDR
Once ATC clearance for push and start received, what are PF memory actions
- Windows and doors checked
- Park brake on
- Beacon on
- Thrust levers idle
What PF action triggers before start below the line checklist
Once all memory items after clearance are completed
PF Engine start procedure
- Eng mode selector ign/start
- “Starting engine 1”
- Engine master switch 1 on
- Engine idle parameters check
- “Starting engine 2”
What parameters to check on engine start
N2 increases (start valve in line, bleed pressure green, oil pressure increase)
16%N2 (indication of active igniter)
22%N2 (fuel flow increases)
50%N2 (start valve cross line and igniter off)
PF after engine start memory items
- Eng mode select Norm
- APU bleed off
- Engine Anti ice a/r
- Wing anti ice a/r
- APU off
- ECAM check
What is PM cue for after engine start memory items
When PF selects engine mode norm
PM after engine start memory items
- Ground spoilers arm
- Rudder trim check zero
- Flaps T/O
- Pitch trim set %
- ECAM (Door and status)
When does PF ask for after start checklist
Once ground crew clear
What does PF do during taxi
Announce clear right, brake check, flight control and rudder check
What is PM response to PF control check
Full up, full down, neutral, full left, full right, neutral (same for rudder)
What does PM do once silently done own control check
- Auto brake max
- FDs on
- FMA and TO data check
- Wx/PWS on
- Atc code set
- T/o config button press
- T/o memo no blues
When does PF conduct PEEDS brief
Once PM has finished memory checks
When to ask for before take off checklist to the line
Once PEEDS brief complete
PM memory items once line up received
- Cabin secured
- Engine mode selector A/r
- Approach path clear
- TCAS TARA
- Exterior lights on
- Table stowed
PF memory items once line up clearance received
- Approach path clear
- Table stowed
When is before take off below the line actioned by PF
Once PM has completed memory checks
When is PM cue to complete memory items after TO
When Flaps 0 has been selected (automatic)
Memory items PM after flaps 0
- Spoilers disarm
- Rwy turn off/taxi lights off
- ECAM memo check
When is release cabin crew announced and what is the action
When conditions allow, signalled by PM double ding on seat belt sign
When are seat belts and landing lights off asked for by PF
When passing FL100 or at cruise alt if lower
When does PF say seat belts on, prepare cabin
Passing FL100 or 10min to landing
What does PM do upon hearing seat belts on, prepare cabin
- Cabin Crew PA
- Select seat belts on
What is cue for PF regarding approach checklist
When the PM has made the Cabin crew landing PA
What does PF do on descending past FL100
- “Landings lights on”
- LS on PFD
When to set standby alt descent
When atis and weather received for destination
PM actions once gear down is asked for
- Auto brake a/r
- Spoilers arm
- All landing lights on
What occasion does PM enter go around alt
If no AP
What is the cue for landing checklist
When landing memo is on ECAM
What does PM say on touch down
Ground spoilers, reverse green, decel
70kts
PF action on vacating runway
Disarm ground spoilers
What is signal to PM for after landing scan
PF disarming spoilers
PM landing scan items
- Landing lights retract
- Strobe lights auto
- Taxi light on
- Wxr/PWS off
- Engine mode select norm
- Flaps up
- Transponder XPNDR
- APU start
“After landing scan complete”
PF turn onto stand actions
Lights off
PA (“CC disarm doors for arrival)
Parking brake set, PM actions
- Seat belts off
- Beacon off
- Ext lights a/r
- Slides disarmed
Ask for parking checklist
What to remember to ask before any ECAM actions start (after confirmation of failure)
Any OEBs?
