Finals: INTERFERENTIAL CURRENCY Flashcards
Frequency of each
low frequency- currents:
medium-frequency:
High frequency:
low frequency- currents: 1 - 2000Hz
medium-frequency: 3000 - 6000Hz
High frequency: >500,000 Hz
Lower frequency = less resistance = ___ amplitude required
Lower frequency = less resistance = higher amplitude required
What type of frequency current stimulates sensory (tingling) and motor nerves (mm contraction)
low frequency- currents
What type of frequency current stimulates sensory & motor nn; overcoming skin resistance
medium-frequency
What type of frequency current induces thermal effects
High frequency
continuous VS peak-to-peak Sweep Patterns
. Continuous sweep involves a continuous modulation of beat frequency, while peak-to-peak sweep alters the beat frequency between maximum and minimum values.
T or F
IFC is Used for pain relief, improvement of respiration , and enhancement of healing process
FALSE
Used for pain relief, improvement of circulation, and enhancement of healing process
Produced by the interference of two medium-frequency alternating currents with slightly different frequencies.
It is also known as amplitude-modulated alternating current.
INTERFERENTIAL CURRENCY
The lower of the two frequencies used in interferential current therapy, typically ranging from 1 to 100 Hz.
Carrier Frequency
The interference frequency resulting from the difference between the frequencies of the two input currents. It reflects the therapeutic frequency that elicits the desired physiological effects
Beat Frequency
Advantages of Bipolar IFC
potential for deeper penetration of currents due to reduced skin impedance with frequencies exceeding 1 kHz.
*The amplitudes of the currents summate in deeper tissues, and a beat frequency similar to other waveforms can be selected for muscle stimulation and pain modulation.
It provides an alternative in promoting low-frequency stimulation to the body, offering therapeutic benefits.
Therapeutic Effects of IFC
Constructive vs Destructive Interference
In constructive interference, the two asynchronous kilohertz (KHz) frequency currents intersect or interfere in-phase, resulting in the summation of amplitudes.
In contrast, destructive interference occurs when the currents are out of phase, leading to the cancellation of amplitudes.