Emergency Checklist Memorization Flashcards
Engine Failure during take off roll
1) Throttle Idle (M)
2) Brakes Apply (M)
3) Flaps Retract
4) Mixture Idle
5) Ignition Switch Off
6) Master Switch Off
Engine Failure Immediately After Takeoff
1) Airspeed (flaps up) 65 (M)
2) Mixture Idle Cut
3) Fuel Shutoff Valve Out
4) Ignition switch off
5) Flaps as required
6) Master Switch Off
7) Cabin Door Unlatch
8) Land straight ahead
Engine Failure During Flight (restart)
1) Airspeed 65 (M)
2) Fuel Shutoff Valve IN (M)
3) Fuel Selector Valve Both (M)
4) Aux Fuel Pump On (M)
5) Mixture rich (M)
6) If prop is stopped, ignition to start
7) Aux pump off
Emergency Landing without engine power
1) Passenger seat / seat belt
2) Airspeed 65
3) Mixture Idle Cut
4) Fuel Shutoff Valve Out
5) Ignition switch off
6) Wing flaps as required
7) Master switch off (when landing is assured)
8) Doors unlatch
9) Tail low touchdown
10) Brakes apply
Precautionary landing with engine power
1) Passenger seat / seat belt
2) Airspeed 60
3) Flaps 20
4) Fly over selected field/landing area, then retract flaps
5) Avionics master / electric switches OFF
6) Flaps 30 on final
7) Airspeed 60
8) Master off
9) Doors unlatch
10) Tail low touchdown
11) Ignition off
12) Mixture Idle
13) Apply brakes
What combo of squawk code and comm frequency do you use?
7700 & Mayday on 121.5
Fire during start on ground (engine starts)
1) Ignition start + keep cranking (M)
2) If engine starts, power to 1700 for a few min (M)
3) Engine shutdown and inspect for damage
Fire during start on ground (engine does not start)
1) Ignition switch start + Keep cranking (M)
2) Throttle full open (M)
3) Mixture cut (M)
4) Continue cranking (M)
5) Fuel shutoff valve out (M)
6) Aux fuel pump off (M)
7) Fire extinguisher
8) Master off
9) Ignition off
10) Parking brake release
11) Evacuate
12) Extinguish
Engine fire in flight
1) Mixture idle cut off (M)
2) Fuel shutoff valve out (M)
3) Aux fuel pump off (M)
4) Master off (M)
5) Cabin heat and air off (except overhead vents)
6) Airspeed 100 knots or find airspeed to extinguish fire
7) Execute landing without engine power
Electrical Fire in Flight
1) Master off (M)
2) Cabin air, vents, heat closed (M)
3) Fire extinguisher activate (M)
4) Avionics master off
5) All other switches except ignition off
6) After fire extinguished, vents / air / heat open
7) If fire extinguished and need to continue…
8) Master on
9) Curcuit breakers check, do not reset any that are out
10) Radio switches off
11) Avionics on
12) Radio / electric switches on one at a time
Cabin fire
1) Master off (M)
2) Vents / cabin air / heat CLOSED (M)
3) Fire extinguisher activate (M)
4) Vents / cabin air/ heat open when fire extinguished
5) Land as soon as possible
Wing Fire
1) Landing / taxi lights off (M)
2) Nav lights off (M)
3) Strobe lights off (M)
4) Pitot heat off (M)
Inadvertent icing encounter
1) Pitot heat on (M)
2) Turn back or change altitude (M)
3) Cabin heat full out and open defroster outlets (M)
Static Source Blockage
1) Static pressure alternate source valve pull ON (M)