Electrical Bus Switching Flashcards

1
Q

GRD PWR switch

A
  • controls external power to the ac transfer buses through the external power contactor (EPC) and the bus tie breakers (BTBs)
  • both AC transfer buses receive power when you put the ground power switch to the ON
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

BUS TRANSFER switch
AUTO- (3)
OFF-

A

AUTO-

  • provides 3 things
  • the BTBs, the DC bus tie relay, and the TR3 transfer relay work automatically as necessary
    1) BTBs work automatically to maintain power to the transfer buses from any operating generator (engine or APU) or external power
    2) the DC bus tie relay automatically provides normal or isolated operation as required
    3) if transfer bus 2 looses power, TR3 transfer relay automatically energizes so that TR3 gets power from transfer bus 1
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

TRANSFER BUS OFF light

A
  • the TRANSFER BUS OFF lights give indication of power status on each transfer bus
  • illuminated means that transfer bus is not powered
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

SOURCE OFF light

3

A
  • no source has been manually selected to power the related transfer bus, or
  • the manually selected source has been disconnected, or
  • the related transfer bus is not powered by the last selected source
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

GEN OFF BUS light

Blue

A
  • illuminated means the IDG is not supplying power to its related transfer bus
  • the engine generator control breaker (GCB) is open
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

APU GEN OFF BUS light

Blue

A
  • illuminated means APU is up to speed (95%), frequency is above 380 Hz and ready for load, however, the APU is not powering a bus
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

GENERATOR switch

A
  • each IDG has a generator switch
  • each switch supplies electrical on/off signals to let the generator control unit (GCU) close its generator breaker (GB)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

APU GENERATOR switch (1 and 2)

A
  • the APU GEN switches can supply power to the AC transfer buses
  • there are two switches - one for each bus tie breaker (BTB)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

GRD POWER AVAILABLE light

Blue

A
  • light is on when external AC power is connected and the power quality is in limits
    panel
  • the bus power control unit (BPCU) does a check of power quality and supplies the ground for the light to come on
How well did you know this?
1
Not at all
2
3
4
5
Perfectly