Electrical

Question 1

All electrical trim plates are to have the flat screw heads positioned ______________.

Answer 1

Straight up and down

Question 2

All GFCI receptacles are to be clearly _________.

Answer 2

Labeled

Question 3

All electrical trim plates are to be ___________ with the drywall, and installed __________.

Answer 3

Flush
Square

Question 4

__________ defective or damaged electrical fixtures.

Answer 4

Replace

Question 5

How are half-hot receptacles to be installed?

Answer 5

Upside down with the switched outlet located at the top

Question 6

Floor outlets are trimmed with a ______ ________.

Answer 6

Brass housing

Question 7

___________ __________ are installed on all outlets in combustible areas.

Answer 7

Sock-o rings

Question 8

Disposal switches are to be mounted inside the cabinet and placed ______ inch from the face frame and _________ inches AFF.

Answer 8

1. 1”
2. 24”

Question 9

Bulbs in recessed cans are to be ___________.

Answer 9

Centered in the fixture

Question 10

A/C disconnect boxes are installed behind A/C condenser units. True or false?

Answer 10

False
They are positioned to the sides of the condenser units

Question 11

The flexible conduit at A/C disconnects are to be secured within ________ inches of the box.

Answer 11

12”

Question 12

Should the air handler be hard wired with a separate switch or have a pigtail?

Answer 12

Yes, hard wired. No pigtail.

Question 13

Do you need a weatherproof cover on an exterior GFCI?

Answer 13

Yes. All exterior GFCIs require waterproof covers.

Question 14

Garage outlets that are NOT on the standard GFCI circuit are to be ______________.

Answer 14

Identified/labeled

Question 15

What are not required to be on arc fault breakers?

Answer 15

Appliances
GFCIs

Question 16

All electric receptacles are to be __________ resistant.

Answer 16

Tamper

Question 17

The electrician is required to hot check the home within ___________ hours after trim compete.

Answer 17

24 hours