Bath Accessories Flashcards
What’s the tolerance on scratches, defects or damage of the finish on bath accessories?
No tolerance
What’s the tolerance on plumb/level/square on bath accessories?
No tolerance
List the measurements on bath accessories (AFF):
TP holder?
Distance from back wall to center of the TP holder?
Towel bar?
Towel ring?
Robe hook?
24”
34”
54”
64”
64”
Screws for the TP holders should not ____________ the inside of the cabinet.
Pierce
The bottom track of the shower enclosure is to be ________ set with a bead of clear silicone.
Wet
The entire perimeter of the shower enclosure is to be __________ with ___________ _________.
Caulked
Clear silicone
The top rail of the shower enclosure are to be cut tight with gaps not to exceed ________ of an inch.
1/16”
What’s the tolerance for binding, leaking, noisy, rubbing doors on shower enclosures?
No tolerance
On swinging shower doors, the drip rail is to have no more than a ________ of an inch gap between it and the bottom track?
1/4”
Sliding shower doors are to be adjusted so the doors close ________ to the wall on both sides.
Flush
All shower glass to have the UL approved tempered glass _______ visible.
Watermark
From what distance do we view shower enclosure glass?
6’
What’s the tolerance for binding, noisy, ghosting doors on medicine cabinets?
No tolerance
What should we see inside when we open a medicine cabinet?
Secured with 4 crews
Shelves installed
Mirror glass should be viewed from a distance of _________ feet?
3’
