Descent Procedure Flashcards
Descent Procedure
Start the Descent Procedure before the airplane descends below the cruise altitude for arrival at destination
Start the Descent Procedure before the airplane descends below the cruise altitude for arrival at destination
Complete the Descent Procedure by 10.000’ MSL
Complete the Descent Procedure by 10.000’ MSL
PF: Before the top of descent, modeify the active route as needed for the approach
PF: Before the top of descent, modeify the active route as needed for the approach
PM: During the descent, verify the RNP as needed
PM: During the descent, verify the RNP as needed
Set the affected center tank fuel pump switch to OFF when a center tank fuel pump LOW PRESSURE light illuminates. Set both center tank fuel pump switches to OFF when a center tank fuel pump LOW PRESSURE light illuminates if the center tank is empty
Set the affected center tank fuel pump switch to OFF when a center tank fuel pump LOW PRESSURE light illuminates. Set both center tank fuel pump switches to OFF when a center tank fuel pump LOW PRESSURE light illuminates if the center tank is empty
When established in a level flight attitude, for an extended period of time with usable fuel in the center tank and a center tank fuel pump switch(es) is OFF, set the center tank fuel pump switch(es) to ON again. Set the affected center tank fuel pump switch to OFF when a center tank fuel pump LOW PRESSURE light illuminates. Set both center tank fuel pump switches to OFF when a center tank fuel pump LOW PRESSURE light illuminates if the center tank is empty
When established in a level flight attitude, for an extended period of time with usable fuel in the center tank and a center tank fuel pump switch(es) is OFF, set the center tank fuel pump switch(es) to ON again. Set the affected center tank fuel pump switch to OFF when a center tank fuel pump LOW PRESSURE light illuminates. Set both center tank fuel pump switches to OFF when a center tank fuel pump LOW PRESSURE light illuminates if the center tank is empty
PM: Verify pressurization is set to landing altitude
PM: Verify pressurization is set to landing altitude
PM: Recall and review system annunciator lights
PM: Recall and review system annunciator lights
PF: Review the system annunciator lights
PF: Review the system annunciator lights
PM: Enter VREF on the APPROACH REF page
PM: Enter VREF on the APPROACH REF page
PF: Verify VREF on the APPROACH REF page
PF: Verify VREF on the APPROACH REF page
B: Set RADIO/BARO minimums as needed for the approach
B: Set RADIO/BARO minimums as needed for the approach
Set or verify the navigation radios and course for the approach
Set or verify the navigation radios and course for the approach
PM: Check landing Performance
PM: Check landing Performance
PM: Set the AUTO BRAKE select switch to the needed brake setting
