commands Flashcards
command displays a PCs current IP routing table
route print
command displays netbios info in windows for IP based networks
nbtstat
rs-232 is a __ pin connector (aka DB-9) that is a type of ______ serial communication medium for low speed communication
9, async
the ____ command can be used to find the layer-3 IP address to a corresponding layer-s MAC address
ARP
lookup a server’s ip via its fully qualified domain name like brockport.edu, the command tool you use on windows is ____
nslookup
csma/ca is a protocol for ethernet (true/false)
false
a single-mode fiber-optic cabling allows an individual light path through it (true/false)
true
STP is a built-in feature of a ROUTER which is used to avoid the broadcast storm (true/false)
false (switches)
IGMP protocol is used by the ping command (true/false)
false
in an ip packet there are a few reserved bits to indicate the length of this ip packet (true/false)
true
a bluetooth network allows wireless communication for short distances (true/false)
true
in copper or fiber, the speed slows to about 2/3 of light speed and becomes frequency dependent (true/false)
true
port #’s less than 1024 are well-known ports for stuff like telnet, ftp, dns, etc (true/false)
true
the unix traceroute command is used to determine the MAC address of a remote machine (true/false)
false
auto mdi-x can automatically switch to the proper configuration once a cable is connected (true/false)
true