Cleaning and Sterilization

Question 1

Probe removal steps 7

Answer 1

1. Close Ablacsonic pouch and lower gallow2. open clamp3. open pump head4. put shield on and remove probe5. select main menu6. Move system7. Remove and disenfect probr

Question 2

When cleaning the probe, how much and many flushed need to occure

Answer 2

1. 60 cc2. Each lumin twice

Question 3

Probe rinsing steps

Answer 3

1. Soak in warm bath 1 minute1. flush channels with tap water3. Repeat flush 3 more times for a total of 4

Question 4

Drying probe steps 5

Answer 4

1. Remove from guide2. use compressed air to clear channels3. wipe with soft, lint free cloth4. Inspect 5. Attache probe protector

Question 5

Cleaning cords, rinsing and brush probe steps 4.

Answer 5

1. Start at the distal end of the cord s and move proximally using a sanity whipe or damp cloth2. Detach probe protector3. Rise with luke warm tap water for 75 seconds3b. transucer indirectly rised for 30 seconds4. flush channels

Question 6

What is the ideal distance between the orange dotted line and the rectal wall

Answer 6

23 mm

Question 7

Cleaning, immersion and brushing probe steps 5

Answer 7

1. Fully emerce in cleaning solution2. let soak for 5 minutes3. Halfway through the use soft bristled brush to manually clean the probe and proctor for 1 minute4. remove visable debris, look at small crevases5. flush each channel twice

Question 8

High level cleaning steps 5

Answer 8

1. prep cleaning solution2. clean cords/rinse brush probe3. Immersing and brushing4. Rinse5. Dry

Question 9

Manual disinfection steps

Answer 9

1, wipe cords up to protectors2. remove protector from probe3. sumerge probe and proctector in high level disinfection bath and flush with 60cc4. Let all elements soak

Question 10

Manual rinsing steps

Answer 10

1. prep sterile bath2. transfer from bath to sterile water3. soak probe and protector 1 minute4. flush 240cc

Question 11

How often does the probe need to be calibrated

Answer 11

every 6 months

Question 12

How is the transducer dried

Answer 12

Air dry

Question 13

Type of dissenfection on probe

Answer 13

High Level

Question 14

Recommended probe cleaning solution

Answer 14

ph neutral enzematic

Question 15

In what order should the workstation componets be cleaned 10

Answer 15

1. screen arm2. screen back3. tablet4. keyboard5. cooling tank6. probe support7. superior cover8. metallic rail9. 4 lateral covers10 breaks, wheels, pads

Question 16

What is recommended to clean temperature sensistive componets

Answer 16

Paracetic acid

Question 17

Common causes for fusion errors 4

Answer 17

1. surgery between DX and fusion2. Hormon therapy3. artifacts generated from the BX4. Prostate limts are different

Question 18

Computer controlled medical device for the transrectal HIFU ablation of prostate tissue

Answer 18

Focal One Description