Auto Flight Flashcards
AFDS (Autopilot Flight Director System) is controlled by:
- 3 FCCs (Flight Control Computers) - giving flight guidance to flight deck displays and command signals to control surface actuators.
- AFDS modes selected on MCP (Mode Control Panel)
Auto throttle system is controlled by:
TMC (Thrust Management Computer) which positions thrust levers based on:
- Thrust limit selections on TMSP (Thrust Mode Select Panel)
- Mode and speed selections on the MCP
What normally powers the left and center autopilots
L Main AC bus
What normally powers the right autopilot
R Main AC bus
When dose the center auto pilot switch to be powered by the STBY BAT
During auto land approach
When will the command bars automatically appear
Go around switch pushed
Airspeed greater then 80 knots
Flaps not retracted
If f/d switches are turned on on the ground what is the default modes selected
TO roll and pitch mode
What is the default mode if FD switch turned on in flight
V/S for pitch
HDG HOLD for roll
*If autopilot is already engaged FD will select currently active modes
When will the autopilot disengage
- Disengage switch on either control wheel
- Electric stab trim is used in single autopilot operation
- MCP autopilot disengage bar is moved down
- failure of the autopilot system
What is cut off by the stab trim cutout switches
Hydraulic power for stabilizer trim