Approach

Question 1

Give at least three requirements of a stabilized approach.

Answer 1

1500AGL/FAF - Gear down, <180kts
1000AGL - final landing config, before landing checklist, +15kt , -5kt of target airspeed, or lateral profile, on vertical profile w/minor breaking
500AGL - airspeed confined in speedbug, thrust setting above idle

Question 2

What are the lowest SkyWest minimums for a CAT II approach?

Answer 2

80ft, 1200RVR

Question 3

What is the maximum crosswind for a CAT II approach?

Answer 3

15kts recommendation not required

Question 4

On a two-engine approach with Flaps 1, how many hydraulic pumps are running?

Answer 4

EDP1, EDP2, ACMP3A

Question 5

What is the single engine approach and landing flap configuration?

Answer 5

Flaps 5, Med autobrake

Question 6

What is the maximum speed for Flaps 3?

Answer 6

200kts

Question 7

On an RNAV approach, what is the minimum autopilot altitude?

Answer 7

MDA or DA

Question 8

When will the pilot receive windshear escape guidance on the PFD?

Answer 8

Automatically during a windshear warning.

If you hit TOGA during a caution

Question 9

What are the PM callouts during a windshear escape maneuver?

Answer 9

Climbing or descending based on RA or VSI above 1000’

Question 10

Should the PF reference the aircraft symbol or FD during windshear if escape guidance is available?

Answer 10

FD

Question 11

How many ways are there to effectively extend the landing gear?

Answer 11

3
The landing gear lever
The emer gear extend lever
the ovrd switch