AIRCRAFT BASE TRAINING AND TESTING

Question 0

Preparation of Flight

Answer 0

• WX satisfactory. Max x wind 15 kt for OEI.
• Runway length sufficient for touch and go.
• Non-standard fuel or ballast if req included on Load sheet as ZFW.
• TRE to supply screen if required.

Question 1

Simulated Instrument Flight Conditions

Answer 1

• Method approved by FOI
• if attached to aircraft: Approved by CAD Airworthiness.
• May not be simulated on Public Transport Flight, also no simulation of emergency maneuvers/procedures.

Question 2

Pre-flight briefing

Answer 2

• Crew duties. Include lookout and ATC.
• Use of abbreviated training CL.
• Method of simulating IMC/OEI
• Effect of systems relevant to asymmetric flight.
• Procedure after simulated OEI.
• Procedure for touch and go, include retardation device.
• Action in event of genuine emergency.
• Arming doors/slides.

Question 3

Pre-Flight

Answer 3

• Check tires, cabin, galley.
• Store loose items.
• Arm doors prior engine start.

Question 4

In-flight

Answer 4

• Fit screen at safe height (200 ft).
• OEI simulated by reducing ONLY, min 500 ft.
  Turbo-prop auto feather follow manufacturers recommendation absolutely.
• RTO Vmax <= 0.5V1
• Precaution against brake overheat
• ILS U/S during renewal: Substitute NPA, precision approach must be conducted during next renewal. Note on report form and C of T.