AIR COND Panel Flashcards
Temperature Selectors - Cockpit/FWD/AFT
Cold 64F, 12oClock 76F, Hot 86F
PACK FLOW Selector - LO
80% - select if 115 or less
PACK FLOW Selector - NORM
100% - select if 115 or more
PACK FLOW Selector - HI
120% - Select if hot/humid
PACK 1 2 pb - Pushed
Opens pack value unless: -Ditching switch selected -Overheat in compressor outlet -Start in process -Air pressure low Fire pb released
PACK 1 2 pb - Fault light (Amber)
Overheat of compressor outlet or pack outlet
Disagreement of value position
PACK 1 2 pb - OFF light (White)
Pack flow control valve closed
ENG 1 2 BLEED pb - Pushed
Opens bleeed valve unless:
- Leak
- Overheat
- Overpressure
- Start value open
- APU bleed valve open
- Air 8 psi or less
- Fire pb released
ENG 1 2 BLEEED pb - Fault light (Amber)
Leak Overheat Overpressure downstream Start in process and valve not closed APU bleed on and valve not closed
ENG 1 2 BLEED pb - OFF light (White)
Bleed valve closed
HP valve closed
RAM AIR pb - ON light (White)
If ditching switch is NOT selected:
- RAM AIR inlet opens
- Outflow valve opens 50% if:
- Differential psi<1, and
- not being controlled manually
APU BLEED pb - Fault light (Leak)
Leak
APU BLEED pb - ON light (White
Opens valve when pushed and:
- N>95%
- No leak
X BLEED Selector - SHUT
Closed
X BLEED Selector - AUTO
Opens if: -APU bleed valve is open Closed if: -APU bleed valve is closed -Wing, pylon or APU leak (except during start)