Air Flashcards
Feature that employs the use of materials or cleaning procedures for high-touch surfaces that react to or disrupt microbes, thus killing them and preventing them from reproducing
Feature 27: Antimicrobial Activity for Surfaces
The three of the environmental pollutants that are measured during a performance test in order to satisfy the requirements of feature 01: Air Quality Standards
Carbon monoxide
PM 2,5
Ozone
Which strategies are best suited to meet the requirements of feature 17,Direct Source Ventilation?
Keeping copiers and printers in isolated rooms with direct venting and self-closing doors
Devices that measure indoor environmental conditions for feature 18, Air Quality Monitoring and Feedback, must measure and record which three pollutant metrics at least once per hour?
Particle count/mass
Carbon dioxide
Ozone
Which combustion-based appliances are banned in regularly occupied spaces by feature 24, Combustion Minimization?
Fireplaces Stoves Space-heaters Ranges Ovens
Which percentage of cost must be spend for meet one of the voluntary material reporting programs listed in the requirements for feature 26, Enhanced Material Safety?
25%
Under which standard is building envelope commissioning of a commercial office project performed after substantial completion?
ASHRAE Guideline 0-2005
Standard for part 1, Ventilation Design - Feature 03, Ventilation Effectiveness
ASHRAE Standard 62.1-2013
In order to meet the requirements of Feature 15, Increased Ventilation, the outdoor air supply rate must be increased over the rate required in Feature 03, ventilation Effectiveness by what percentage?
30%
Feature 25, Toxic Material Reduction, limits the amount of halogenated flame retardants in flooring, piping, and thermal insulation to what level?
0.01% (100 ppm)
What is the recommended relative humidity level in part 1: Relative Humidity, Feature 16, Humidity Control?
Within 30%-50%
