Additional Material

Question 1

All design changes or repair to an aircraft with an IAA permit to fly must be:
(a) IAA approved
(b) Approved by the manufacturer
(c) You cannot change design or repair an aircraft on an IAA permit to fly

Answer 1

(a) IAA approved

All design changes and repairs on aircraft with an IAA Permit to Fly must be IAA approved. The IAA have authorised some societies and associations to approve minor changes to aircraft.

Question 2

Who decides what must be included as a critical task?
(a) The Aircraft Manufacturer
(b) The Local Aviation Authority
(c) The Airline / MRO

Answer 2

(c) The Airline / MRO

Question 3

Applications for European Technical Standard Order Authorisation (ETSOA) are made through:
(a) EASA form 34
(b) EASA form 43
(c) EASA form 17

Answer 3

(a) EASA form 34

Question 4

Who develops the ETOPS Manual?
(a) Operator
(b) EASA
(c) Manufacturer

Answer 4

(a) Operator

Question 5

Where can maintenance requirements for All Weather Opertaions (AWOPS) and Reduced Vertical Seperation Minima (RVSM) be found?
(a) In the MMEL
(b) In the maintenance schedule
(c) In the MEL

Answer 5

(b) In the maintenance schedule

Question 6

When does the Airworthiness Review Certificate get re-issued?
(a) 1 year
(b) 3 years
(c) It doesn’t get re-issued

Answer 6

(b) 3 years

Question 7

Service Bulletins, Service Letters and Airworthiness Directives must be reviewed by?
(a) The NAA (National Aviation Authority)
(b) Each individual Operator of the Aircraft
(c) CAMO ( Continuous Airworthiness Management Organisation)

Answer 7

(b) Each individual Operator of the Aircraft

Question 8

Unsalvageable components are
(a) Allowed to re-enter the component supply system if a repair solution has been approved
(b) Never allowed to re-enter the component supply system
(c) Allowed to re-enter the component supply system without an approved repair solution

Answer 8

(a) Allowed to re-enter the component supply system if a repair solution has been approved

Question 9

What can a maintenance programme apply to?
(a) Only one aircraft
(b) Several aircraft once effectivity is clearly identified
(c) It is the same for all aircraft

Answer 9

(b) Several aircraft once effectivity is clearly identified

Question 10

The duration of the letter of agreement shall not exceed
(a) 1 year
(b) 5 years
(c) 3 years

Answer 10

(a) 1 year

Question 11

For Reliability Programme, the authority should be notified within:
(a) 1 day
(b) 3 days
(c) 4 days

Answer 11

(c) 4 days

Question 12

Where is the effectivity block located on a page of the AMM?
(a) Lower left hand corner
(b) Lower right hand corner
(c) Top right corner

Answer 12

(a) Lower left hand corner

Question 13

What Eu regulation defines accurately the categories of flight and minimum requirements for flight crews and procedures? In relation to Maintenance Check Flights (Mcf).
(a) 1321/2014
(b) 748/2012
(c) 965/2012

Answer 13

(c) 965/2012

Question 14

Maintenance check flight level A is?
(a) Where abnormal use or emergency procedures is expected
(b) Where no emergency procedures are expected
(c) Where an inexperienced pilot flys the plane

Answer 14

(a) Where abnormal use or emergency procedures is expected

Question 15

Upon change of an IAA aeronautical notice how will it be re-issued?
(a) with a new serial number, issue number and effective date
(b) with the same serial number, new issue number and new effective date
(c) with the same serial number, new issue number and the same effective date

Answer 15

(b) with the same serial number, new issue number and new effective date

Question 16

Part-21 Subpart H is in relation to what?
(a) Type Certification
(b) Permit to fly
(c) Certificate of Airworthiness

Answer 16

(c) Certificate of Airworthiness

Permit to Fly is Subpart P
Type certification is Subpart B

Question 17

For permits issued by organisations other than the competent authority, a copy of the permit and associated flight conditions must be submitted to the competent authority no later than
(a) 2 days
(b) 3 days
(c) 4 days

Answer 17

(b) 3 days

Question 18

Where is the noise certificate stored?
(a) In the cockpit of the aircraft
(b) With the operator
(c) With the CAMO

Answer 18

(a) In the cockpit of the aircraft

Question 19

Test flights are a mandatory requirement;
(a) Post to the issue of a Certificate of Airworthiness for an aircraft being imported to an EASA member state
(b) Prior to the issue of a Certificate of Airworthiness for an aircraft being imported to an EASA member state.
(c) Before the aircraft is delivered to an airline that operates in an EASA member state

Answer 19

(b) Prior to the issue of a Certificate of Airworthiness for an aircraft being imported to an EASA member state.

A test flight must be carried out in order for a C of A to be issued on all imported aircraft

Question 20

Airworthiness Directives, what does each number mean?

FAA AD 91-10-05

EASA 2022-301

Answer 20

FAA AD Year-Bi weekly- No.

EASA AD Year-No.

Question 21

Where is the type cert data sheet for noise included?
(a) Aircraft Type Cert
(b) Engine Type Cert
(c) Airframe Type Cert

Answer 21

(a) Aircraft Type Cert

Question 22

When an Alert Service Bulletin requires urgent changes to manual information for airworthiness or safety reasons an Alert is issued. What colour paper is it printed on?
(a) Pink
(b) Red
(c) Yellow

Answer 22

(a) Pink

When an Alert Service Bulletin requires urgent changes to manual information for airworthiness or safety reasons an Alert, printed on pink paper, is issued and filed in the revelant point in the manual.