737 Systems: Communications Flashcards

1
Q

What is the purpose of the ALT-NORM switch on the ACP?

A

NORM: ACP operates normally

ALT: ACP operates in degraded mode

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

The PTT switch, when toggled, transmits on which source?

A

Selected Source

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What does the SERVICE INTERPHONE switch on the Aft Overhead do?

A

ON: Allows MX or service personnel external jacks to connect to the interphone system

OFF: Communication from the Flight Deck to Flight Attendants still possible, but the external jacks are deactivated

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What does the ATTEND button do?

A

Sounds a two-tone chime in the cabin and illuminates both pink Master Call lights

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

How can the Flight Deck alert the Ground Crew?

A

By using the GRD CALL switch on the overhead, which sounds a horn in the nose wheel well when pressed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What is the purpose of the VHF TEST switch on the RTP?

A

Removes the auto squelch feature, permitting reception of background noise and thereby testing receiver operation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What is the indication of tuning an offside RTP?

A

A light above the frequency transfer switch, known as the OFFSIDE TUNING LIGHT

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What failure messages could display on the RTPs, and what do they mean?

A

PANEL FAIL: The RTP panel has failed

FAIL FAIL: The radio itself has failed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What considerations should be made before keying the HF Radio on the ground?

A

While the aircraft is being fueled/defueled, as injury to personnel or a fire may result. And that personnel should remain 10ft from the vertical stabilizer when the system transmits to avoid injury.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Does the hand mic on the Aft Electronics Panel require the ACP to be tuned before making a PA to the cabin?

A

No, it bypasses the ACP

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Why must the SELCAL light be reset?

A

No other calls may be received until the channel is reset

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Which ACP is used to control the cabin MEDLINK headset jacks?

A

ACP 3 aka Observers ACP (On the overhead panel)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What is the priority of source selection for ACARS in the data mode?

A

1) VHF
2) SATCOM (if installed)
3)HF

How well did you know this?
1
Not at all
2
3
4
5
Perfectly