6.2 Flashcards
Wi-Fi, use for wireless Internet access uses ——-Channel management
Dsss
A Wi-Fi – – which is the centrally connectivity device for Wi-Fi clients on a net work is manually configured to use a select group of channels Wi-Fi Cline devices scan the entire bed for active channels
Access point ap
And antennas – – – – – – – – – – describes the relative strength over a three-dimensional area I’m all electromagnetic energy in the antenna sent or received
Radiation pattern
This in China issues wireless St. Louis along a single direction this type is used when the source needs to communicate with One Direction is in a point to point link or in a specific area
Directional antenna or unite directional John
This antenna issues and receives wireless signal with someone equal strength and clarity in all directions
Omni directional antenna
You can determine the gain or loss of an access point attached to an external seller by considering initial power output of the HP, signal loss along the antenna cable, and signal gain from the antenna itself and it is a theoretical ratio used to measure and Teleperformance this overall calculation is referred to as – – – –
E IRP effective iso tropic radiant power
 The wireless Corazon in China distance to wireless client and noise in the vibrate can offer to the power of the receive seal and – – – space – – – measures in decibels the power of the signal on the receiver end
Known as EIRP or effective isotropic we have power
This refers to the way in which a wave travels from one point to another
Propagation
Straight line propagation is known as
Line of sight
Similar to wire transmission wireless of yours can be amplified by increasing the power of the transmission or by extended by repeating the signal from a Closer broadcast point using a repeater also known as
Wireless range extender
When are SSI decibel rating for a strong signal is – – – – – –, and Laura SSI example of a Unsuitable transmission would be -
-30 DBMN : -90 DBMN
After the signal is transmitting the father of moves away from the transmission source the more it weakens this is called – – – – –
Attenuation
As a single runs into various obstacles generally will gradually fade which causes the strength of a signal that reaches the receiver to be lower than that transmit signals or strength this is known as
Fading 
Electromagnetic waves at the atmosphere can interfere with wireless communication similar to have EMI affects wire transmissions because wireless signals cannot depend on a conduit or shielding to protect them from EMI then we’ll vulnerable to noise then wire transmissions are this is known as 
Interference
The proportion of noise to the strength of a signal is called
Signal to noise ratio