5.5

Question 1

Do you effectiveness of STP shield in twisted-pair depends on the following characteristics

Answer 1

Environment
Thickness and material used for the shield
Grounding mechanism
Symmetry and consistency of the ceiling

Question 2

This cable line consists of one or more insulated wires pairs encased in a plastic she’s as its name implies it does not contain additional shielding for the twisted Paris as a result is both less expensive and less resistant to noise then STP

Answer 2

UTP

Question 3

——-is more popular than STP due to the price. But cable prices have come down enough where it might only cost you a few extra pennies per foot for the better shielding

Answer 3

UTP

Question 4

This cable grade is designed to withstand high temperatures such as would be experienced in an attic space it offers a high quality fire retardant jacket to reduce the spread of flames and areas with air circulation and it burns with less smoke that is non-toxic

Answer 4

Pelenium grade cable

Question 5

Hey similar cable type is also coated with a fire retardant jacket and is he sick or cable to make it easier to push or pull through risers and buildings or between floors

Answer 5

Riser rated cable

Question 6

 between STP And UTP Only STP can transmit at rates faster than 10 GB a second. This characteristic or factor is known as

Answer 6

Throughput

Question 7

Both STP and UTP Use this type of connector

Answer 7

RJ 45 or registered Jack 45

Question 8

T568 a wiring standard setup

Answer 8

GW/g/ow/B/BW/o/Brown white/brown

Question 9

T568 be wiring

Answer 9

Orange white / orange / Green white/blue/blue white/orange/brown white/brown

Question 10

The most common type of networking cable also called patch cable create one terminate the RG 45 plugs at both ends of the cable identically following one of the t568 standards

Answer 10

Straight through cable

Question 11

Computers and routers are intended to send and receive signals on the wires as identified this port configurations called – – – – – and contrast switches use an alternate for configuration called – – – – –

Answer 11

Medium dependent interface MDI
MDI crossover MDIX

Question 12

This cable has t568a standard on one end and t568b on the other

Answer 12

Crossover cable

Question 13

This cable tribe has the transmit and receive wires reversed and was used to connect a computer to a computer or a switch to a switch

Answer 13

Crossover cable yeah yeah bitch you’re adorable do you realize how adorable you are

Question 14

Unlike a crossover cable this cable over reverse the wire pen output regardless to how they are paired

Answer 14

Rollover cables also called consul cables

Question 15

Released in 2003 as part of the ieee released at 802.3 AF standard which specifies a method of supply and logical power over twisted-pair ethernet connections

Answer 15

POE