2023 Recalled Questions Flashcards
The act regulating the practice of agricultural and biosystem engineering in the Philippines.
RA 10915
RA 11203-ARTICLE XII-SEC 13: There is hereby created a Rice Competitiveness Enhancement Fund, herein referred to as the Rice Fund, has been created. The rice fund shall consist of an annual appropriation of ____________ following the approval of this act and shall be automatically credited to a special account in the General fund of the national treasury which shall be placed within ninety (90)days upon effectivity of this act.
P10B for the next six years
RA 11203: Rice extension Services: The 70% allocation for TESDA shall be used for the following
Rice crop Farming, farm mechanization, seed production, modern rice farming techniques, and knowledge/technology transfer through schools nationwide.
A PIC bearing the registration number and its validity and expiry dates duly signed by the Chairperson of the Commission shall likewise be issued to every registrant who has paid the prescribed fees, and has submitted a certificate of membership in good standing from the AIPO and proof of completion of the CRD requirements. The said card shall be renewed every ______, subject to requirement/s as the Board may thereafter prescribe and upon proof of completion of the mandatory CPD requirements.
3 years
All drawings, plans, specifications, and other documents and reports to be used for the design, construction, test and evaluation, research, and extension of agricultural and biosystems buildings, structures, machinery
and equipment, irrigation, soil and water conservation structures, and other
Agricultural and Biosystems Engineering facilities/projects shall be signed and sealed by a licensed Agricultural and Biosystems Engineer.
Fully
The following are signed and sealed by an Agricultural and Biosystems Engineer,
EXCEPT:
a. Slaughterhouse
b. Communal Irrigation
c. Farm Roads
d. Barangay roads
d. Barangay roads
Section 33-34: At least how many engineers are required in Provincial/City/Municipal Engineer, Agriculturist, Building Official, Environment and Natural Resources Officer, and Planning and Development Officer of the LGUs, subject to the candidate’s compliance with the rest of the requirements imposed by the law or issuance creating the said positions.
1
SEC. 40: This is required for every Agricultural and Biosystems Engineer registered with the Commission which is hereby made mandatory for the practice of the profession.
a. CPD
c. oath
b. Teaching
d. seminars/training
a. CPD (Continuing Professional Development) RA 10915
SEC 17 (RA 10601): All agricultural and Fisheries machinery assemblers, manufacturers, importers, suppliers, distributors and dealers are required to provide after-sales service and warranty to then respective clients which shall be monitored by the agriculture offices of the:
LGUs and BAFE
The main DA agency/bureau/office for organic agriculture in the Philippines is:
BAFS
The firing order of 8-cylinder V-piston
1-8-7-3-6-5-4-2
An act known as “Ecological Solid Waste Management Act of 2000
RA 9003
The normal operational speed of tractor engine
2000-2400 rpm
The burning efficiency of rice hull furnace
95%
In National Building Code: What group is the ABE?
Group J - Agricultural Structures
The projection of cash inflow and outflow of a farm to estimate the incremental net benefit of the life of the project is known as
cash flow
The primary gas produced during anaerobic digestion of agricultural wastes.
methane (byproduct is carbon dioxide)
The air requirement for gasification of agricultural waste ranged from
30-40% of stoichiometric air
Gear oil is used for;
I. Engine
II. Differential
III. Hydraulic system
IV. Transmission
a. I, II, III and IV only
b. II only
c. I and IV only
d. II and III only
b. II only
Gear oil is specifically designed for lubricating the differential (II) and sometimes the transmission system, depending on the type of vehicle or machinery. However, engine oil and hydraulic fluids are different types of lubricants and serve different purposes. Gear oil is much thicker and used in parts like the differential where heavy loads and pressures are present.