1101 2.8 Networking Tools Flashcards
What tool would you use to add RJ45 connectors to the ends of an Ethernet cable after running it through a building?
Crimper
When would you use a cable stripper in network cable installation?
To remove the sheathing from Ethernet cables before attaching connectors.
What device helps analyze the airwaves to identify WiFi channels and signal interference?
WiFi Analyzer
How can a toner probe help you identify a specific cable in a bundle of cables?
By detecting the tone signal sent by a tone generator attached to the target cable.
What is the function of a punchdown tool in network setup?
To securely insert and trim wires in a punchdown block.
When testing the connectivity and pin configuration of Ethernet cables, what tool would you use?
Cable Tester
What tool would you use to test a network interface by sending signals from the interface back into itself?
Loopback Plug
What is the purpose of a network tap in a networking scenario?
To make a copy of the data flowing between devices for analysis without interrupting the flow.
In what scenario would you use a WiFi analyzer in a corporate office?
To optimize the placement of WiFi access points by identifying areas with signal interference.
How do you use a cable crimper to attach an RJ45 connector to an Ethernet cable?
By inserting the stripped cable wires into the RJ45 connector and then crimping them to secure the connection.
What is the benefit of using a punchdown tool instead of manually inserting wires into a punchdown block?
It ensures a secure connection and cuts off excess wire, making the installation neater and more reliable.
When setting up a network, how could a loopback plug be used to verify the functionality of a network card?
By plugging it into the network interface card and checking if the transmitted data loops back correctly.
What is a typical use case for a toner probe in a data center?
To locate a specific cable among many by detecting the tone emitted from a connected tone generator.
How does a network tap differ from a switch in network monitoring?
A network tap provides a dedicated way to access the data flow for monitoring, without affecting the network performance as a switch might.
Why would you use a cable stripper when installing coaxial cables?
To cleanly remove the outer layer without damaging the inner conductor, preparing the cable for connector attachment.