Y:116 AVGAS

Question 1

What is the maximum speed for Flap 10?

Answer 1

110 knots

Question 2

When do you lower the flaps to 10 degrees?

Answer 2

Abeam the touch down point

Question 3

What is the maximum speed for Flap 20?

Answer 3

85 knots

Question 4

When do you lower the flaps to 20 degrees?

Answer 4

When established on base leg

Question 5

What is the maximum speed for Flap full?

Answer 5

85 knots

Question 6

When do you lower the flaps to full?

Answer 6

When established on final.

Question 7

Which approximate power setting is used on:

1. Climb out (after 300 ft)?
2. Downwind leg?
3. Abeam the touch down point?

Answer 7

1. Full power
2. ≈2100 RPM
3. ≈1800 RPM

Question 8

What reference point is used for you to know when to turn from downwind to base?

Answer 8

45 degrees from the touch down point

Question 9

What is the meaning of “touchdown point”?

Answer 9

The point where you plan the wheels to touch the ground.

Question 10

What is the meaning of “go-around point”?

Answer 10

The point where you shall go around if you haven´t landed yet.

Question 11

What is the meaning of “power off point”?

Answer 11

The point where you take the power to idle and starts to brake, if you aren´t airborne yet.

Question 12

Which is the lowest altitude to be established on final?

Answer 12

300 feet

Question 13

What is the climb flow when performing traffic patterns?

Answer 13

Flaps - UP
Power - SET
Engine instruments - CHECK
Landing Light - OFF