Wiring Standards Flashcards
The terms 568a and 568b, refer to a set of ______ standards developed by TIA/EIA. Which is also known as the __________________ ________ ___________.
wiring, telecommunications, industry, association.
And these terms 568a and 568b defines the rules on how _______ pair cables should be wired to __-__ connectors.
twisted, RJ-45
These wires (568 wiring), must follow a certain order so that the network can ________ ________.
function properly
The 568a standard is wired in this order:
white-green, green, white-orange, blue, white-blue, orange, white-brown, brown
The 568b standard is wired in this order:
white-orange, orange, white-green, blue, white-blue, green, white-brown, brown.
in 568 wiring standards, there is no __________ in the functionality as to which ________ is used.
difference, standard
Whether you choose to use the a or b wiring standard, if both ends of the cable are wired using the same ________, then this known as a ________ _____.
standard , straight, cable
A straight cable allows signals to pass ________through from ___ to end.
straight, end
a ________ _____ is the most common type of cable and it is used to connect _________ to hubs, switches, or modems.
straight, cable, computers
a cross-over cable is created when both ____ of the cable are wired using the two _________ __________.
ends, different, standards
Cross-over cable EX: one end is wired to the 568_ standard and the other is wired to the 568_ standard.
a,b
Crossover cables are used to connect two _______ _______ together
similar, devices
you can use a crossover cable to connect two _________ directly to each other without using a ___ or a switch.
computers, hub
Crossover cables are also used to _______ hubs or _______ to each other.
connect, switches
A Rollover cable is created when both ends are _____ completely ________ of each other.
wired, opposite
a rollover cable is used to connect a computer or terminal to a router’s _______ ____.
console, port
A loopback cable is used for _______ ________. It’s to make a computer think that it’s connected to a _______.
testing, purposes, network
to make a loopback cable, you connect pin __ to pin 3 and pin __ to pin 6.
1,2
