WELDING Flashcards
Dumb easy
What are three general types of welding?
Gas, Eletric arc and Eletric Resitance Welding
What is the purpose of shielding an arc weld with an inert gas ?
It prevents the atmosphere oxygen/nitogen from contaminating the weld
What does the size of the torch tip opening determine?
The amount of heat delivered by the torch tip, but not the temperature.
How is a soft flame obtained without reducing termal output?
By using a larger tip and adjusting the pressures.
What valve should be turned off first when extinguishing a torch?
The acetylene gas valve.
What safety precaution should be taken when gas welding has been completed?
Turn off the valves and relieve all pressure
What is the result of insufficient penetration?
The weld will be weak.
What must be done with heat-treated aluminum alloys after a welding repair has been made?
It must be reheat treated.
Why is it necessary to use flux in all silver soldering?
To have the base metal chemically clean without the slightest film of oxide.
What type of flame is used for silver soldering?
A neutral flame or slightly reducing flame.
What must be done in the weld zone to successfully weld titanium?
The weld zone must be shielded with an inert gas.
What procedure will control expansion when welding a joint?
Tack welding at intervals along the joint.
What type of repair could be made for a dented steel tube cluster joint?
Weld a formed steel patch plate over the dented area
What is the preferred method of welding aluminum?
Gas shielded arc welding.(TIG Welding)
What is the preferred method of welding magnesium?
Gas shielded arc welding. (TIG Welding)
