Tools

Question 1

TIC
A) how do you turn the TIC off?

B) what color and where is the L, and what color does it turn into

Answer 1

A) hold down button 4 seconds

B) starts off with a green L in the LOWER LEFT CORNER , when it hits High Heat temperatures it turns BLUE “L” which indicates High Heat Low sensitivity

Question 2

TIC

RED LED ?

When colors Yellow through Red (275-320) appear OVER 15% of the viewed arEA, what does that mean

Answer 2

A) red Led = 15% battery remaining

B) over 15% means it shifts into HIGH HEAT Blue L mode

Question 3

TIC

HOW LONG IS OPERATING TIME?

Answer 3

2 hours and it takes 2 hours for battery to charges

Question 4

Air bags

A)void using airbags on surface heated to what temp ?

B) you should change the cylinder when the High Pressure gauge falls below what PSI?

C) never stack more than 2 airbags on top of each other

Answer 4

A) on surfaces OVER 220 degrees

B) when high pressure gauge falls BELOW 200psi

C

Question 5

Air bags

Bags should only be inflated 1/2 - 3/4 of their rated capacity, to avoid the lil lowing affect

Maximum internal pressure is 118 psi

• the bags require at least an Inch of space to operate

Answer 5

The low pressure gauge is set at 135
Always open the high pressure gauge slowly
GENERALLY YOU should inflate he bottom bag 1st

Question 6

Thermal i C

Average field view ?

B) what can it not see through ?

C) what is the focal point ?

D) what does white swirling waves of smoke indicate ( mostly at ceiling level)

Answer 6

A) 50% is the average field view

B) can’t see through GLASS PLASTIC and not good on shinny surfaces

C) the focal point is 3 feet away from the lens
D) white swirling waves of smoke indicate CONVECTIONAL HEATING