Systems - FMS Flashcards
What determines which FMS becomes the Bus Controller (BC)?
The first panel to complete its PBIT
What are the first four lines of data on the FMS display called?
Header
The pilot’s FMS header defaults to what on power up?
NAV
How may waypoints may be put into a flight plan?
99
How many “store points” may be captured?
25
“IG2” indicates which navigation solution?
Blended solution from the #2 EGI.
What does the “STS” annunciation display at the top of the FMS mean?
A change in status has occurred
A Box around a parameter on any given screen indicates what?
That the parameter may be edited.
Manual selection of the aircraft navigation solution can be accomplished by accessing which FMS page?
EGI
How can you quickly “capture” a Target Store point?
Press the FIX fixed function key twice.
How is FPLN-A or FLPN-B initiated?
From the Flight Plan EDIT page, select ENGAGE.
Which page allows the pilot to change the com data/frequency assigned to a specific preset?
DAT (Mission Data Page)
What is the purpose of the flight plan Sequence Next function when in the Auto mode?
Allows the operator to sequence to the course between the next pair of waypoints.
PBIT is short for?
Power up built in test
CBIT is short for
Continous Built In Test
