Supplemental Lighting (4) Flashcards
Main purpose of supplemental lighting
Make sure the minimum lighting requirements are met.
What does a phosphor coating do on an LED light?
shifts the wavelengths produced from an LED (pale blue) to a warm yellow colour so that the produced light mimics a radiated incandescence.
Angle of viewing with light
ASME Boiler and Pressure Vessel Code, Section V, Article 9 states: eye must be closer than 25inches but not to close that the eye cannot focus, viewing angle is not less than 30° from the measured inspection surface
Colour Filters
Used to change the characteristics of light during an inspection;
- coloured filters -eliminate colours
Scotopic vision
trying to preserve light (Scotopic)
- Flashlights with red filters
Diffusers
Used to change the characteristics of light;
- diffusers intentionally scatter the light source to reduce glare, contrast and shadows
Polarizing Filters
Used to change the characteristics of light;
- control light scatter and glare, polarize the source or received image
Magnification
Magnifiers/Loupes
Mag power = 10
——-
focal distance (in)
Remote Visual Inspection
- Mirrors
- Borescopes
- Videoscopes