Preparation to enter a marina Flashcards
What warps should be ready when entering a marina
The bow and stern lines should be attached to the cleats on deck ready to tie up on both sides in case of a change in plan
what else should be set up
Fenders on both sides of the boat, set to the right hight for the dock your going to be using
What should be done before traveling to a marina
Contact the marina to see if they have a visitors berth available, as well as any requirements such as insurance and holding tanks
when contacting a marina on vhf what channel should be used
the marina working channel which is given in the almanack or pilot guide
When tied up, where should the spare warp be
on board the boat
When multiple yachts raft up in a tidal current or river, what should be done by the outermost yacht
they should lay an anchor upstream to stabilise the raft and stop it curving to the downstream
what knot should not be used to tie up for a long period of time
a round turn and two half hitches, as it can be undone under pressure
at this immage https://www.navathome.com/online_images/images/images1/boats_tied_up.gif, name all the lettered warps
A: Bow Spring B: Stern Spring E: Stern Line F: Bow Line C: Stern Shoreline D: Bow Shoreline