POWER

Question 1

socapex (multi)

sock a pet in the nose!!

Answer 1

also called MULTI-CABLE

• A 19-pin Socapex setup with a 12 gauge cable and 6 circuits.
• 20 amps per circuit a total of 120 amps (20 amps/circuit x 6 circuits).
• This translates to 14,400 watts at 120 volts (120 amps x 120 volts).
• Total wattage at 208 volts x 20 amps = 24,960 watts

Question 2

L21-30 Connector

Answer 2

add the 2 in 21 to the 3 in 30 that gets you 5 … join the 1 and 0 for 10 - gets you 5-10 … switch it for 10/5

Also called 10/5
10 gauge 5 pins

L21-30 refers to a specific type of electrical connector, also known as a NEMA L21-30. It’s a locking connector commonly used in high-power applications, typically rated for 30 amps per leg, 120/208 volts, and with three phases and four poles.

can make:
30 amps of 208 and 30 amps of 120
90 amps of 120

Appearance: L21-30 connectors have a round shape with five pins, one for each phase, neutral, and ground. The plug and receptacle both have a locking mechanism that twists to prevent accidental disconnection.

Question 3

Nema 5-20

Answer 3

120 volts, 20 amps, next step up from an Edison plug (Nema 5-15p), which is 120volts 15amps.

The NEMA 5-20P is a 3 Wire grounded plug featuring two blades and one ground pin rated up to 125V AC and 20 Amps. The NEMA 5-20P is used in applications that require higher power draw such as large refrigerators, space heaters, large kitchen mixers, etc. as compared to a edison plug (NEMA 1- 15 is rated for15 amps.

Question 4

shore power is also called

Answer 4

power service
Or electric service
Or (200 amp) service

Question 5

break in’s are

Answer 5

power/signal merging ON to the cable like highway. Break OUTs is power/signal merging out of the cable.

Question 6

power connecters for speakers and lights:

Maker:
Model:

Answer 6

Neutrik
PowerCON

Also might be called NL3

Question 7

power connecters for speakers and lights - Water proof Version?

Make:
Model:

Answer 7

make: Neutrik
model: PowerCON TRUE 1

The Neutrik powerCON TRUE1 is a locking 20A true mains connector that is designed for use in harsh environments. It is a very rugged connector that is water and dust resistant, making it ideal for outdoor applications. (ip65)

The powerCON TRUE1 is also a break-before-make connector, which means that it can be safely connected or disconnected under load.

Question 8

L6-20
?? nmonic for this?

Answer 8

The L6-20 connector is a type of electrical connector that is commonly used in industrial and commercial applications. It is a 20 amp, 250 volt connector that is designed for use with single-phase power. The L6-20 connector has a locking mechanism that helps to prevent accidental disconnection.

Question 9

200amp Motion Laps 120v

Answer 9

little doors cover the output for the passthrough

Question 10

Cable Sizes and respective AMPS

Answer 10

Question 11

what is it?

Answer 11

L6-30
It is a locking, three-wire grounding receptacle with a maximum input of 30 amps and 250 volts with three wires: two hot wires and a ground wire.