Pool Cert Flash 8. Outdoor Pool Care Flashcards
What must be done to all unprotected metal parts of chemical feeders to pretect against weathering for outdoor pools?
Clean and grease
For outdoor pool closures, what should be done with pressure gauges?
Stored in a warm dry area.
When preparing a recirculation pump for pool closing, what must be inspected and repaired if necessary.
The impeller casing must be drained and inspected for wear.
What other procedures must be taken for outdoor pool pumps upon seasonal closing?
- Lubricate pump according to manufacturer’s instructions. 2. Cover or remove and store electric motor to protect from moisture.
What system lines must be drained to prevent freezing?
Pool inlets, city water lines to the toilets, drinking fountains, showers, etc.
What must be done to properly protect toilets and urinals, hot water heater, and storage tanks upon seasonal closing?
All tanks must be drained or flushed and emptied.
How should pool fixtures be prepared for seasonal closing?
Drain mixing basins, filter piping, hair and lint strainers, chemical solution tanks, suction cleaner hoses and store suction cleaner hoses in a warm dry area.
How should diving boards be stored?
Warm dry area on a flat surface.
For seasonal closing of outdoor pools, leaving water in the pool or completely draining is optional. If you leave water in the pool, what is the required drainage level?
6” below the side wall inlets.
What must be done with chemicals being stored for seasonal closures?
Must be labeled and identified. Store in dry space accessible to authorized personnel only.
Before pool openings, what inspections and repairs should be performed approximately one month before opening?
Inspect pool walls, bottom and deck. Repair chips and cracks.
You do not have to flush lines leading to and from the pool, T or F.
F. You must flush all lines with fresh water.
What is the proper cleaning solution for scrubing the sides of the pool, not removing stains?
1.5 ounces of soap and 1.5 ounces of trisodium phosphate (TPS) per gallon of water.
Flowmeters should be ______ and stored in a warm dry area.
Drained / Removed
The filter must be ____ thoroughly, completely drained, and inspected for any repair needs.
Backwashed