Plumbing Fixtures 060201d

Question 1

This water closet may or may not be constructed with a jet assembly in the trap way

Answer 1

Reverse trap bowl

Question 2

These water closets are commonly specified for use in public washrooms for the ease of floor cleaning

Answer 2

Blowout bowl

Question 3

In a water closet a 2” tube bent at 90 Degrees

Answer 3

Flush ell

Question 4

Shower bases for multiple piece showers

Answer 4

Receptors

Question 5

If the shower base is made from poured concrete what must happen

Answer 5

A liner must be installed between the concrete and the wooden structure

Question 6

Pedestal basins made from vitrified China require what

Answer 6

Wall brackets to support the basin and screwed to the wall

Question 7

Floor drain openings should be clear of what

Answer 7

Obstructions like floor coverings or appliances

Question 8

This drain should not have any other fixtures draining into it

Answer 8

Floor drain

Question 9

What type of trap should a floor drain be installed with

Answer 9

Deep seal trap with 4” minimum seal

Question 10

The valve for a water closet required by code

Answer 10

Fixture control valve with 3/8” compression outlet

Question 11

What is a chrome plated shower nipple threaded in both ends bent to?

Answer 11

30 degrees bend

Question 12

The only fixture required by code to have a fixture control valve

Answer 12

Water closet

Question 13

Toilet rough in

Answer 13

12” from back 15” side to side

Question 14

What don’t kitchen sinks have ?

Answer 14

Have no over flow arrangement

Question 15

Lavatory sink rough in

Answer 15

Centre of sink directly behind
16” -18” from construction floor

Question 16

Water closet rough in location and distances

Answer 16

12” from back wall, 15” each side

Question 17

Tub rough in location

Answer 17

Centre of the tub width 2”-6” from back wall

Question 18

Kitchen sink rough in

Answer 18

Back of cabinet 12” from the side 12-15” high