Pierce Electrical System

Question 1

The Samlex power inverter converts low voltage DC power from the chassis batteries to standard _____.

Answer 1

115 volt AC power.

Question 2

Use the power inverter to provide electrical power to AC

devices. The total power output rating for this application is _____.

Answer 2

1125 watts.

Question 3

LED Indicators:

Solid green = Power Saving/ Power Output

Answer 3

Enable/ ON

Question 4

LED Indicators:

Flashing Green = Power Saving/ Power Output

Answer 4

Enable/ OFF

Question 5

LED Indicators:

Solid Amber = Power Saving/ Power Output

Answer 5

Disable / ON

Question 6

LED Indicators:

Flashing Amber = Power Saving/ Power Output

Answer 6

Disable / OFF

Question 7

Power Saving Mode:

Press and hold the ON/OFF button for ____ to toggle the unit between modes

Answer 7

two seconds

Question 8

Power Saving Mode:
Regardless of power saving mode, when power OFF is set, the power will be turned off and the power saving mode
will be set to OFF automatically

Answer 8

(amber LED flashes for 2-3 seconds).

Question 9

Do not connect the power inverter to ____ wiring.

Answer 9

household or RV AC distribution

Question 10

Do not connect the power converter to any AC load circuit which the _____ or the negative of the DC (battery) source.

Answer 10

Neutral conductor is

connected directly to ground (Earth)

Question 11

Overload:

Wait for at least _____ before switching the inverter remote control switch to ON again.

Answer 11

three minutes

Question 12

Heat/AC Shed/ Unshed Point

Answer 12

12.2 volts / 12.4 volts

Question 13

LM powerpoint Shed/ Unshed Point

Answer 13

12.4 volts / 12.6 volts

Question 14

150A Radio Comp Spare Shed/Unshed Point

Answer 14

12.6 volts / 12.8 volts

Question 15

Loads will shed when voltage drops to the shed point for a minimum of ___.

Answer 15

1 minute.

Question 16

Once shed, the load will remain off for a minimum of ____, and will not unshed until the unshed voltage is achieved for a minimum of ___.

Answer 16

5 minutes / 1 minute.

Question 17

Fast Idle is activated whenever system voltage is reduced to ____ for at least one minute.

Answer 17

12.8 volts

Question 18

Fast idle remains on for a minimum of ___ and until ___ is achieved.

Answer 18

10 minutes / 13.0 volts