2018 Pierce

Question 1

Danger signals an

Answer 1

imminently hazardous situation that, if not avoided, will result in death or serious
injury

Question 2

WARNING signals a

Answer 2

potentially hazardous situation that, if not avoided, could result in death or serious
injury

Question 3

CAUTION with the safety triangle signals a

Answer 3

potentially hazardous situation that, if not avoided, might

result in minor or moderate injury

Question 4

CAUTION used without the safety triangle symbol signals a

Answer 4

potentially hazardous situation that, if not

avoided, might result in property damage.

Question 5

Pierce Arrow XT pumper/tanker apparatus is a ____ equipped with a Waterous
model CMU water pump rated at 1500 GPM

Answer 5

mid-ship mounted pumper vehicle

Question 6

The chassis is equipped with _____ , and a Meritor _____

Answer 6

TAK-4™ 22,800 lbl independent front suspension / RS23-186, 24,000 lbl
solid rear axle.

Question 7

The vehicle is powered by a ________ and 1550lbft torque driven through an Allison 4500 EVS transmission with 5th generation prognostics.

Answer 7

Cummins ISX12 6-cylinder diesel engine capable of 450hp

Question 8

Electrical System: _____ inverter to power external equipment

Answer 8

1200 Watt Samlex power inverter

Question 9

Electrical System: equipped with a set of _________ rated at a total of ______ and a Kussmaul EV40 battery charging system

Answer 9

(6) 12V batteries rated at a total of 950 Cold Cranking Amps

Question 10

Electrical System: A ______ alternator provides the main power to the electrical system

Answer 10

CE-Niehoff 360 amp

Question 11

Water pump: it is equipped with _____ mounted on a stainless steel shaft with a mechanical type water seal and a _______

Answer 11

Bronze impellers / Electric transfer valve actuator

Question 12

Water pump: Is equipped with a _____ to protect against ____ in the pump.

Answer 12

Zinc anode rods / galvanic corrosion

Question 13

Engine

Answer 13

Cummins ISX 12 729CI (11.9L), EPA 2016, 450HP@1800 rpm, 1550lb-ft@1200
rpm, 2100 rpm governed speed

Question 14

Transmission

Answer 14

Allison 4500 EVS

Question 15

Front Axle and Suspension

Answer 15

Pierce TAK-4™ 22,800lbl, non-driving

Question 16

Rear Axle

Answer 16

Meritor RS23-186, 24,000 lbl, driving

Question 17

Rear Suspension

Answer 17

Reyco Leaf Spring, 24,000 lbl

Question 18

Steering (Chassis)

Answer 18

Sheppard M110 w/Tilt, Eaton Pump

Question 19

Brakes, Front

Answer 19

Meritor EX225, 17” Disc Plus

Question 20

Brakes, Rear

Answer 20

Meritor EX225, Disc Plus

Question 21

Braking, ABS

Answer 21

Wabco ABS Brake System 4S4M

Question 22

Wheels, Front

Answer 22

Alcoa 22.50” x 12.25” Aluminum, Hub Pilot

Question 23

Wheels, Rear

Answer 23

Alcoa 22.50” x 8.25” Aluminum, Hub Pilot

Question 24

Tires, Front

Answer 24

Michelin XZY3 (wb) 385/65R22.50, 18 ply, Fire Service Load Rating

Question 25

Tires, Rear

Answer 25

Michelin XZA2 Energy, 315/80R22.50, 20 ply, Single

Question 26

Alternator

Answer 26

Niehoff C531 w/ Remote Regulator/Rectifier, 360 amp

Question 27

Batteries

Answer 27

(6) Delco 31-900CT, 950 CCA ea, Thread Stud, 31922 Isolator

Question 28

Monitor

Answer 28

TFT Hurricane XFIH-DJ1A, 1250 GPM, Dual Handwheel

Question 29

Nozzle

Answer 29

TFT M-FS1000-NJ

Question 30

According to the National Safety Council, ____ vehicle accidents can be blamed on poor backing techniques.

Answer 30

1 out of 4

Question 31

In a medium sized truck, blind spots can extend up to ____ in front and ____ behind a vehicle

Answer 31

16 feet / 160 feet

Question 32

Electricity will arc across a gap as large as _____

Answer 32

10 feet

Question 33

Do not work within ____ of high voltage lines energized from ______

Answer 33

10 feet / 600 to 50,000 volts

Question 34

Electrocution hazard: If it is critical that you leave the vehicle, ___ as far away as possible landing with both feet together

Answer 34

JUMP

Question 35

Electrocution hazard: The ground becomes charged ____ with varying voltage potential. Straddling these bands can result in serious injury or death as the current passes through your body.

Answer 35

in concentric circles around the vehicle

Question 36

High Pressure Fluid Leaks: Detect leaks with wood or cardboard. Wear sturdy gloves and goggles. ____ use fingers

Answer 36

Never

Question 37

Fluid injected into skin must be ____ by trained doctors immediately or gangrene will result.

Answer 37

surgically removed

Question 38

High pressure hydraulic fluid at pressures as low as | ___ can penetrate skin.

Answer 38

100 psi

Question 39

Most Doctors are ___ in treating hydraulic related injuries

Answer 39

not trained

Question 40

UHP water or foam solution is discharged at pressure over ___ . At this pressure, the discharge stream may be capable of puncturing human skin and thus entering the blood stream.

Answer 40

1000 | PSI

Question 41

ALWAYS____ Drain/Bleeder Valve BEFORE removing Inlet or Discharge cap

Answer 41

OPEN