OSHA 30 Construction Personal Protective Equipment Flashcards
what OSHA sections describe the requirements for PPE
29 CFR 1910 (gen industry)
29 CFR 1926 (construction )
PPE should never be seen as the
first line of defense or the second it should only the third or final line of defence
OSHA requires that workers are trained for PPW use
what must be documented
the training the occurred
the employees understanding
the name of each employee used
dates of training
being able to identify the PPE
What does a good protective hat do
allows for shock absorption, has headbands and allows for some electric shock protection
Under what conditions does OSHA require worker have head protection
if exposed to flying or falling objects and or electric shocks and burns
were is the OShA standards for protective hats located
ANSI Z89.1
type 1 head protection
protects from objects that fall from above
type 2 head protection
protects from lateral protection plus hazards that fall from above
what are the helmet types in regards to electrical resitance
class e tested for 20,000 volts
class G tested for 2200 volts
class C not tested for any electricity
were is all the relevant helmet information located
inside the hat
How are most shellslhelmets cleaned
by dipping them in hot 140 degree water with soap for around a minute then scrubbing and cleaning the helmet
store helmets in
a clean dry and inert location
what is the #1 cause of eye injuries
flying particles
what does shade number mean
it is the amount of shade that a welding shield has and it is dependent on the work being done
what spec must eye and face protection meet
ANSI Z87.1
can googles be worn in combination with spectacle or corrective lenses
yes
how long should you flush your eyes
15 minutes
most foot injuries are cause by objects less then ____________ and weighing ___________
4 feet 65 pounds
what is the most often the best source of information regarding chemical protective gloves
the manufacturer or supplier
how many people are occupationally exposed to unwanted noise and how many have hearing loss
30million and 10 million respectively
when is a hearing conservation program
programs were hearing loss is a possibility
When must employers monitor nouse
it is over 85 decibels and lasts over 8 working hours
what are 4 basic types of hearing protectors
molded earplugs
custom moldered earplugs
self molded earplugs
earmuffs
are ear muffs less protective then earplugs
yes
respirators must be approved by who
NIOSH
what are the two main types of respiratores
air purifying devices
atmosphere supplying respirators
what are the two types of air purifying devices
aerosol/particle removing
gas/vapor removing
what are the levels of full body protection from highest to lowest
class A
Class B
Class C
Class D
what is the max allowed free fall for a fall arrest system
6 feet
when ever feasible should physical barriers be used
yes
What is the standard name for the high visibility safety apparel
Ansi/isea 107-2015
what are the three classes of visibility clothing in level of most visible to least visible
3
2
1
the main purpose of a fall restraint is to
prevent workers from getting to close to an unprotected edge
