Operational Limits/Requirements Flashcards
Max pressure altitude for takeoff and landing
14,000’
Max tailwind component for takeoff and landing
10 kts
0 kts for takeoff above 12,000’ if modified by SB 45-72-1
Required runway conditions for takeoff and landing
Paved
max 3/4” standing water
( ) must be on prior to takeoff
Rudder boost
Max pressure altitude en-route
51,000’
35,000’ if spoilers are inop
The cabin must not be ( ) for landing.
pressurized
Fuel must be balanced within ( ) for all phases of flight.
200#
Limit maneuvering load factors
Flaps up: +2.9 to -1.0 g’s
Flaps down: +2.0 to 0.0 g’s
The acceleration values limit the bank angle in a level coordinated turn to ( ) flaps up and ( ) flaps down.
70° flaps up
60° flaps down
What is prohibited above FL180?
Gear, flaps, and stalls
Is the Lear 45 certified for aerobatic maneuvers and spins?
No
If the aircraft has been cold soaked on the ground to ( ) or lower, the aircraft and its components must be warmed to ( ) or above prior to ground start.
-23°C
The cabin temperature must be warmed to ( ) prior to takeoff.
-15°C
